|
|
|
#16
11-06-2009, 7:58 PM
|
||||
|
||||
|
No granite... that would destroy knives in short order... decoration only.
__________________
Self-proclaimed LED guru  Hi-Tec Designs, Owner USCutter 24" LaserPoint Vinyl Cutter Universal PLS4.60 60W (measured @ 73W!!!) laser cutter/engraver w/Rotary Freeware: InkScape, Paint.NET, GhostScript/GSView, Scribus Paidware: Wacom Intuos4 (Large), Flame Polisher (ooooh, FIRE!), CorelDRAW X4 
|
|
Ad Sponsored by Google
Ad Sponsored by Google
|
|
|
|
#17
11-07-2009, 11:05 PM
|
||||
|
||||
|
A lot of times, cutting boards (like the one I posted) are generally just wall hangers.. The one above is engraved from a picture of my daughters farm that was taken from the air in the 60's, and came with the property when they bought it. The barn and the driving sheds are now gone, but the house has been standing for 150 years.. I made it as a house warming present, and it now hangs in their kitchen. I just came back from there this evening after a day of 'deer searching' I'm gonna have to throw some carrots in the water to thicken up that 'track soup'
__________________
Epilog 24TT, CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 20year collection of various and assorted cr  pI assume full responsibility for my actions, except the ones that are someone else's fault.
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
