|
|
|
#1
10-31-2009, 12:45 PM
|
|||
|
|||
|
Purse hangers
Does anyone know where I can purchase wholesale generic purse hangers?
__________________
Jeff Laser's Edge Engraving 916.813.6461 Epilog 24TT 45watt Corel 12, X3 
|
|
Ad Sponsored by Google
Ad Sponsored by Google
|
|
|
|
#2
10-31-2009, 2:16 PM
|
||||
|
||||
|
Las Vegas has a lot of them... I believe they call them call girls, however.
I have no idea what a purse hanger is... any pics?
__________________
Self-proclaimed LED guru  Hi-Tec Designs, Owner USCutter 24" LaserPoint Vinyl Cutter Universal PLS4.60 60W (measured @ 73W!!!) laser cutter/engraver w/Rotary Freeware: InkScape, Paint.NET, GhostScript/GSView, Scribus Paidware: Wacom Intuos4 (Large), Flame Polisher (ooooh, FIRE!), CorelDRAW X4
|
|
#3
11-01-2009, 12:55 PM
|
|||
|
|||
|
You funny guy! A quick look on the net shows you what they are.
__________________
Jeff Laser's Edge Engraving 916.813.6461 Epilog 24TT 45watt Corel 12, X3
|
|
#4
11-01-2009, 1:32 PM
|
||||
|
||||
|
Jeff, you might try here :
http://www.southernimperial.com/ Don't know if they have that exact thing or not, but you might come close. Never dealt with them before, but was told about them this past week.
__________________
Universal PLS4.60 with Rotary Attachment Graphtec FC7000MK2-75 Plotter, Copam Vinyl Plotter, Xenetech XOT 13 x 13 Rotary Engraver, Corel X3 Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
|
|
#5
11-01-2009, 5:25 PM
|
||||
|
||||
|
Hi
I get mine from Signature Engravers. The are better then the one you pictured and the ladies love them. I will attach a photo of the one we use.
__________________
 Ray Uebner Trotec Speedy 300 45w, Xenetch 1313, Signature 8080 Plus, Baby Lock EM6 
|
|
#6
11-01-2009, 6:57 PM
|
|||
|
|||
|
Ray
Are they blanks and you put your designs on them or do you buy them that way from them? Jeff
__________________
Jeff Laser's Edge Engraving 916.813.6461 Epilog 24TT 45watt Corel 12, X3
|
|
#7
11-01-2009, 8:31 PM
|
||||
|
||||
|
They are blank, I use the signature to engrave them but could be done on another rotary engraver. I have not tried to laser them as I have the signature so use it. They come with a black velvet pouch.
__________________
Ray Uebner Trotec Speedy 300 45w, Xenetch 1313, Signature 8080 Plus, Baby Lock EM6
|
|
#8
11-02-2009, 5:49 PM
|
|||
|
|||
|
Anyone have a good source for these purse hangers that are laser engravable?
__________________
Roger McDowell
|
|
#9
11-03-2009, 10:54 PM
|
||||
|
||||
|
There must be a run on these.. I had never heard of them before, and last week I had a customer that I made something else for, ask me if I could supply a bunch of these with their corp. logo.. I told her I would look into it and see what I could find.. Hmmmm.. Spooky...
__________________
Epilog 24TT, CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 21year collection of various and assorted cr  pThe one thing that unites all human beings, regardless of age, gender, religion, economic status, or ethnic background, is that, deep down inside, we all believe that we are above-average drivers.
|
|
#10
11-04-2009, 1:18 AM
|
|||
|
|||
|
Purse Hanger
Woodturners Catalog has the hanger. You provide the "disk"
http://www.woodturnerscatalog.com/st...e_hanger?Args=
|
|
#11
11-04-2009, 12:03 PM
|
|||
|
|||
|
Being a guy I have to ask...what in the world is the purpose for these? The only thing I can think of is that studies have shown that the bottom of purses are filthy because they tend to get placed on the floor etc.
So is this their purpose? If so, must be a run on them due the the swine flu over reporting scare tactic garbage bottom feeding journalism that has become so commonplace now that my opinion of journalists is lower than...even lawyers...
|
|
#12
11-04-2009, 12:11 PM
|
||||
|
||||
|
Quote:
dirt on the bottom of their purse would be the least of their worries. 
__________________
Woodturners: the only cult in the known universe that forces you to make your own decoder ring. "Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle. We used to be hunter gatherers. Now we're shopper borrowers. The three most important words in the English language: "Front Towards Enemy". The world makes a lot more sense when you remember that Butthead was the smart one. You can never be too rich, too thin, or have too much ammo.
|
|
#13
11-04-2009, 12:32 PM
|
||||
|
||||
|
Quote:
These have been available for a year to a year and a half (as best I recall) and someone decided they make nifty stocking stuffers so that may be why there is a "run" on them.
__________________
Just another day in paradox... Everybody knows what to do with the devil but them that has him. My Grandmother I had a guardian angel at one time, but my little devil got him drunk, tattooed, and left him penniless at a strip club. I have not had another angel assigned to me yet. I didn't change my mind, my mind changed me.
|
|
#14
11-04-2009, 2:44 PM
|
|||
|
|||
|
Quote:
http://www.delphiglass.com/index.cfm...emsysid=192526 http://www.delphiglass.com/index.cfm...emsysid=202395 These have a rubber backing on them to protect the surface they are being hung on and also to keep it from sliding around. Cost put's them just under 4.00 each if you get set up with a wholesale account. - Al Last edited by Al Bray; 11-04-2009 at 2:52 PM.
|
|
#15
11-04-2009, 4:35 PM
|
|||
|
|||
|
I just ordered a half dozen. My wife collects handbags like I collect tools except hers cost more. She always fusses when she's at a restaurant and they have no provision for her handbag.
My daughters have the same bad habit.
__________________
Mike Null When all else fails, read the manual.
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
