Cnc control relay boxes

[Gary Campbell]

Add automatic control from your CNC software for your dust collection, routers or vacuum. Each control box is custom made for individual user's requirements. Can be configured with receptacles, pigtails or open terminal for user wiring. Knockout holes for cord grommet, Romex or conduit provided.

Relay box on left (below) has knockouts for user wiring. Box on right has receptacles and pigtails for plug and play. Switching is done via contactors for 120 or 240 volt loads up to 40 amps per relay channel. All prewired for true plug and play. Colors to match other than SB machines avalable. (even yellow!)

Requires TTL relay board to operate. These are avalable up to 10 channels and can also be used to control drills, solenoid valves for air operated accessories. Dry contact relays avalable to "press" the pesky SB router/spindle START button with a software command.

email islaww(at)comcast.net for prices & more info. Please put "Relay" in subject line.
Thanks for looking, Gary