If it's a Unisaw, the motor uses a mount that is unique to Unisaws. As far as the fence is concerned, there should be a number of aftermarket fences...
The windows will be trimmed like a picture frame. I've done that before and it wasn't hard to do. I had planned on using trim screws to assemble the...
In 1979 Frank Klausz wrote in Fine Woodworking that a mortise chisel needed to be tapered front to back so you could "steer" it. It was obvious from...
I have some other things I've made from the olivewood and the movement (in my area) is not bad. I don't think the top of that box will have problems...
You could also cut a full length dado on the top piece, and fill in the in between gaps after the fact, then rout them flush. I did that on a morris...
Bonjour! My stomping ground is a bit inland, New Hampshire and Vermont. Newburyport MA has antique shops and a Country Craft Fair. Your timing may be...