My first concert was Jefferson Airplane in ‘67 at Ithaca College. I helped set-up their light show which consisted of scaffolding and about 50 of the...
Made this from stuff around the shop. The Oak was pretty gnarly but with patience and 'seen from a distance' it came out ok. The back was some cheap...
Gabby -- Without being in the shop with you, I cannot know for sure if the 'slow going' you experienced was a result of too little power or too small...
That is how I have done it. I have trimmed out windows in two houses with thick (8" and 12") deep walls where the solid wood extension jambs and sill...
I forget the turner's name but a former Creeker had Maloof buy one of his turnings at a WW show in either Memphis or New Orleans. This turner died a...
I've never had a 5hp motor on a bandsaw in the 50+ years I've been woodworking. But I've never used a carbide blade with very little set in the teeth...
Here's some pictures of the windows. I got the casings cut to length today and tomorrow I'll tackle the angles. As long as I get the angles right the...
I would fit and scribe each of the 4 jamb extensions prior to assembling them into a box. I take a cheap Ryobi table saw to trim jobs and make those...