Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Holmes Anderson Today, 7:42 AMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Koepke Yesterday, 5:36 PMI have a Laguna 14BX 2.5hp 14" bandsaw and a 3/4" Resaw King blade which was bought together with the bandsaw. It works very well and the 3/4" Resaw King blade cut very well although I don't have much experience with bandsaw and don't know how well other bandsaw cut. However, there is always a...
Last Post By: Bernie Kopfer Yesterday, 8:58 PMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Maurice Mcmurry Yesterday, 8:02 PMAfter last year's trip to this part of the country, a second trip is needed. Total trip recap is in this thread from 2023. https://sawmillcreek.org/showthread.php?301671-Looking-for-some-travel-tips-SC-TN-KY-WV I’m planning this second trip for the fall. I have about 16 days/nights I can be gone...
Last Post By: Michael Drew Yesterday, 2:47 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
On question number two, there's no negative impact to system performance on the blower outlet side if you go back to 6".
Jim Becker Today, 8:40 AMThat's a wonderful end result after all that hard work, both for the build and getting the finish the way you wanted it! Bravo!
Jim Becker Today, 8:36 AMI just did a touch-up on a fiberglass door that has faux woodgrain stain followed by Waterborne Urethane Spar Varnish. The Urethane was flaking and peeling
Maurice Mcmurry Today, 8:14 AMYes, I see. Could be a problem with how the motor is being connected to line power. Maybe the OP could post some photos of how he's wired the motor.
Holmes Anderson Today, 7:42 AMWelcome John Totten! Two sheets of plywood are a big help for moving heavy items over gravel and grass. If you have a slope or hill it gets tricky. I
Maurice Mcmurry Today, 7:41 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 10:02 AM