I've got a well head cabinet/enclosure to make which is in a remote location, about a 2 mile hike through the mountains without any trails. I've spent a few hours making measurements, and we will likely make this in sections, and strap them to our backs and assemble it in the field. There is no...
Last Post By: Thomas McCurnin Yesterday, 9:57 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Becker Today, 7:52 PMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Maurice Mcmurry Today, 8:33 PMHi, I'm new to the forum. I'm 78 and have been using a Craftsman 10 inch 113.298051 for the last 39 years to build furniture for my house and various projects. I never upgraded until now because the craftsman could do what I needed and I didn't want to spend the money. Last week the fence wouldn't...
Last Post By: Maurice Mcmurry Today, 8:47 PMI'm going to build some built-in bookcases in my house. The complicating factor is that the ceiling is 10' high. Of course, many have suggested I make some cabinets on the bottom half and then put shelves above so that the shelves would be 8' tall or shorter, but I don't want that; I want all open...
Last Post By: Tom Bender Today, 9:18 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Another exceptional piece of work. Thanks for posting the pictures.
Robert Hayward Today, 9:16 PMThat should make more than a few people happy over multiple generations!
Tom M King Today, 9:07 PMVapor pressure of Acetone is about 185 torr. Naptha is .75-2.25 torr depending on exact composition, and mineral spirits is .75-10, again depending on
Paul F Franklin Today, 9:04 PMI was thinking you made the top out of pieces that wide. I don’t why but that’s what I was thinking I apologize for my mistake.
I do sorta remember
No way to know. I can’t tell from the pictures. Is this a deal breaker?
Roger Feeley Today, 8:53 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 5:52 PM