I have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Curt Harms Today, 10:16 AMI have a Laguna 14BX 2.5hp 14" bandsaw and a 3/4" Resaw King blade which was bought together with the bandsaw. It works very well and the 3/4" Resaw King blade cut very well although I don't have much experience with bandsaw and don't know how well other bandsaw cut. However, there is always a...
Last Post By: glenn bradley Today, 9:23 AMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Maurice Mcmurry Yesterday, 8:02 PMAfter last year's trip to this part of the country, a second trip is needed. Total trip recap is in this thread from 2023. https://sawmillcreek.org/showthread.php?301671-Looking-for-some-travel-tips-SC-TN-KY-WV I’m planning this second trip for the fall. I have about 16 days/nights I can be gone...
Last Post By: Michael Drew Yesterday, 2:47 PMThe Woodriver Side Rabbet Plane is on sale at Woodcraft for $69.99 down from $99.99. I was wondering whether anyone on this forum has bought this plane and likes it. The WoodRiver Side Rabbet Plane takes it’s linage from the Record 2506S and incorporates two manually adjusted blades and an...
Last Post By: Derek Cohen Yesterday, 7:47 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I have a different lathe but I've been considering making a shelf of 2x4's on edge and stacking pavers onto the shelf (sand bags are messy if they tear).
John Kananis Today, 10:26 AMPennsylvania has among the highest if the highest gas tax in the country. I assume this applies to diesel as well.
Curt Harms Today, 10:16 AMThat was kind of my thought as well. A saw stop isn't the be-all end-all, kick back can still be an issue for instance but it helps. A second issue with
Curt Harms Today, 9:59 AMI started with one of those Sears saws and put a Biesemeyer fence on it. Of course, that was fairly expensive by itself. I eventually got a SawStop
Mike Henderson Today, 9:57 AM
Help with low motor power on table saw
Thread Starter: Karl CardHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Holmes Anderson Today, 7:42 AM