Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Holmes Anderson Today, 7:42 AMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Tom M King Today, 11:05 AMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Mike Allen1010 Today, 11:29 AMI have a Laguna 14BX 2.5hp 14" bandsaw and a 3/4" Resaw King blade which was bought together with the bandsaw. It works very well and the 3/4" Resaw King blade cut very well although I don't have much experience with bandsaw and don't know how well other bandsaw cut. However, there is always a...
Last Post By: glenn bradley Today, 9:23 AMAfter last year's trip to this part of the country, a second trip is needed. Total trip recap is in this thread from 2023. https://sawmillcreek.org/showthread.php?301671-Looking-for-some-travel-tips-SC-TN-KY-WV I’m planning this second trip for the fall. I have about 16 days/nights I can be gone...
Last Post By: Michael Drew Yesterday, 2:47 PMDerek, can’t thank you enough for posting this thread. I really appreciate all the photos, insights into your iterative design/build process and your
Mike Allen1010 Today, 11:45 AMI appreciate your perspective Maurice- removing layout marks seems pretty standard. However, I personally like to leave the baseline marking gauge line
Mike Allen1010 Today, 11:29 AMThanks a lot Prashun!! I always enjoy your thoughtful comments and suggestions.
Mike Allen1010 Today, 11:21 AMThanks everyone for your advice. Even though I'm 78, I am very fit (except for the partially herniated disk). I play competitive tennis (3.5-4.0) several
John Totten Today, 11:19 AM
Dining room carver chairs - Take 2
Thread Starter: Derek CohenAbout a month ago I began a thread about designing and building two carver chairs to accompany the 6 bentwood chairs we have owned for the past 40 years. The chairs were purchased all those years ago along with a table, which is around 200 years old. We need a larger table, and time has come to...
Last Post By: Mike Allen1010 Today, 11:45 AM