I've got a well head cabinet/enclosure to make which is in a remote location, about a 2 mile hike through the mountains without any trails. I've spent a few hours making measurements, and we will likely make this in sections, and strap them to our backs and assemble it in the field. There is no...
Last Post By: Thomas McCurnin Yesterday, 9:57 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jerome Stanek Today, 12:36 PMHi, I'm new to the forum. I'm 78 and have been using a Craftsman 10 inch 113.298051 for the last 39 years to build furniture for my house and various projects. I never upgraded until now because the craftsman could do what I needed and I didn't want to spend the money. Last week the fence wouldn't...
Last Post By: John Lanciani Yesterday, 10:19 PMI'm going to build some built-in bookcases in my house. The complicating factor is that the ceiling is 10' high. Of course, many have suggested I make some cabinets on the bottom half and then put shelves above so that the shelves would be 8' tall or shorter, but I don't want that; I want all open...
Last Post By: Tom Bender Today, 9:18 AMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Yesterday, 8:50 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I can't see that real clearly. Could it be a flaw or void in the casting? I broke the trunnions on mine. They were repaired with J B Weld and some 1/8"
Maurice Mcmurry Today, 7:04 PMThe wine box doesn't look too bad- you could cut it in half and make two shallower stacking boxes...
Cameron Wood Today, 7:04 PMIf you seal it well first, you could glaze it with a white stain that could be stripped off chemically or sanded later and get you back to clean wood.
John TenEyck Today, 6:47 PMNever had an issue in attached garage at home or outdoor shed at the cottage.
Ron Citerone Today, 6:13 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 5:52 PM