Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Holmes Anderson Today, 7:42 AMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Koepke Yesterday, 5:36 PMI have a Laguna 14BX 2.5hp 14" bandsaw and a 3/4" Resaw King blade which was bought together with the bandsaw. It works very well and the 3/4" Resaw King blade cut very well although I don't have much experience with bandsaw and don't know how well other bandsaw cut. However, there is always a...
Last Post By: glenn bradley Today, 9:23 AMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Maurice Mcmurry Yesterday, 8:02 PMAfter last year's trip to this part of the country, a second trip is needed. Total trip recap is in this thread from 2023. https://sawmillcreek.org/showthread.php?301671-Looking-for-some-travel-tips-SC-TN-KY-WV I’m planning this second trip for the fall. I have about 16 days/nights I can be gone...
Last Post By: Michael Drew Yesterday, 2:47 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I started with one of those Sears saws and put a Biesemeyer fence on it. Of course, that was fairly expensive by itself. I eventually got a SawStop
Mike Henderson Today, 9:57 AMThat’s how I felt. My laser is a little sloppy and someday I plan on making a better one, but even so it saves me so much time and is so much more
Thomas Wilson80 Today, 9:52 AMThe black dots are just knots/internal branch remnants. That particular blank had some funny grain areas with lots of knots.
I had to
Glad to hear that the laser is working well for you Thomas until I started using it I was always holding my breath!
Peter Blair Today, 9:29 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 10:02 AM