how do I shut of the XY cord and turn on the size boxes?corel.jpg
how do I shut of the XY cord and turn on the size boxes?corel.jpg
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Bert
EDIT: In my answer below I'm afraid I missed your point. Mine looks more like Bill's version.
The x-y on the left represent the position of the drawing on the page. When you select the drawing, as you have done, the size boxes are active and, in this mode, you can adjust the x or y dimensions or both. If you want them to be proportional depress the lock icon and alter the size.
I believe the position of the drawing is a default setting.
Last edited by Mike Null; 01-05-2018 at 9:01 AM. Reason: wrong answer
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Something has changed, this is what mine looks like.
CorelSm.jpg
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
Bert,
You must have something in your image that is blocking sizing the image.
To check it deselect your image and just draw any object. Select new object and verify if you can resize it.
Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
Xenetech 1625 x2,
New Hermes TX pantograph, CG4 cutter grinder
Brady Globalmark2 label printer,
Assortment of custom tooling , shears & punches, heat bender.
Software: Xenetech XOT, Corel X3, Bartender label software
Or there is more than one Object, a small one or a duplicate not Selected.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
I've never seen that happen, and try as I might I can't duplicate it-- is it possible the graphic is 'protected' from alteration somehow?
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Can you take a wider screen shot, with your object manager showing?
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
opened object mgrwidescreen.jpg
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Looks like, two objects are selected, the outside box and then the round object inside? Are they Grouped and can you ungroup?
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Grouping is an issue on a lot of things... Usually catches me and makes me scratch my head a lot
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
grouping comes in handy when your designing your project, I use it all the time, but I have never locked an object, so never ran into this problem before.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
I often lock objects - useful when tracing over the top, before deleting them. Locking stops them being accidentally clicked and moved...
Best wishes,
Ian
ULS M-300, 55w made 2002 with rotary. Goldenlaser 130 watt, 1300x700 made 2011.
Flat bed 2500x1300 150/90watt 2 tube laser, 2018 model.
Esab router, 1989, 4.5 x 2.0 m, conv. to Tekcel, and modded a 2nd time.
HP L260-60". Roland PNC-1410. Mimaki GC-130 SU.
Screenprinting carousel 6x4 and 7x4 ft 1-arm bandit vac table.
Corel Draw X3, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.