Karl several years ago, I made numerous throat plates for my Unisaw. I routed a 1/4 x 1/4” x 1" groove in the bottom front and epoxied a ¼” x 1 3/8”...
At 85 my Father In Law went through a phase of gorilla gluing chairs and other genuine colonial antiques. The chairs are stuck together for sure. It...
You're essentially asking about different kinds of permanent glues. If you're going to reglue with a more or less permanent adhesive then use a high...
I wouldn't bother greasing the bearings unless as Bill said if there's a vent for the old grease to vent out. If the motor has the original bearings...
In my experience, a 4-wire motor is reversible direction depending on which wires you jumper together, like your #3 and whichever one it's taped to. ...
I have some model train plans produced by Steamer Plans in 1990. It appears the plans are for: a Pacific 4-6-2, an American 4-4-0, a Compound Mallet...