Use the same glue as used previously. If hide glue, you can glue over glue. However all else requires removal of old glue otherwise it will not hold....
Alan, for the dowels, look at the photos how I did this. Make a simple guide by drilling a squared block of wood. Mark the position of the dowels on...
The Louisiana hobby guy has a test file to determine kerf. Just remember the kerf is different for each type of material you are lasering. There are...
10.6 micrometers is the wavelength of the laser. The easiest way to figure out the kerf of the laser is to do something like create a 10mm square in...