I suggest you paint the adapter with a marker then slide it in and rotate the adapter by hand. What you are doing is checking the fit of the male and...
I just use the standard cope and stick router bits. Built my kitchen in 1989, still going strong. The fit has to be right in the set, so I prefer the...
I still think your problem is with the terminal. Only the terminal looks burned. The wire under the burned terminal looks pristine. If that wire got...
The VSCT extrusion attaches to the PM2000 fence with bolts that have heads that fit the extrusion slots. I used two, one near the front and one near...
As an aside, if looking for parts for the 45, Fine Tool Journal, in its tool sale section, always has spares and partially complete planes for sale. ...
For epoxy, I try to use just enough so that you get little to no squeeze out. I recently built a piece of fine furniture entirely using epoxy...it's...
Could be, and I'm also not sure he realized how far a 5-iron would carry at that altitude (Denver). In any case, for the rest of the classes at that...