Originally Posted by Scott Hubl Well I finished up my turning tool rack. "The Rocket Launcher II" I still have some arranging to do and I may add some things or remove them but for the most part I have Completed my Turning Tool Organization Project. I give you - The Rocket Launcher II, Turning Tool Rack. Overall Shot Closer Shot ...
Originally Posted by Scott Hubl Project- Rocket Launcher II Searching threads I recently came across Ken Whitneys Tool Rack he made in this thread,http://www.sawmillcreek.org/showthre...t=#post1588127 , and contacted him for more info on it. Ken was nice enough to send me more info and pics, he also posted that info and pics here for all to use.> http://www.sawmillcreek.org/showthre...cher-Tool-Rack The "Rocket Launcher" ...
Originally Posted by Ole Anderson Can't go wrong with the flexibility of pegboard, make sure to get the 1/4" stuff, don't know if they even sell the 1/8" anymore. For the price of drywall, you can get 1/2" OSB which will take a beating compared to drywall and you can screw stuff to it without looking for studs. I have all three in my shop, even have OSB painted and unpainted. Either works fine. Pegboard on the bottom half wouldn't get my vote. Insulating the walls? = Ole, not sure what you recommend - did insulate ...