Hi Steve, I just bought Tony Spotorno's Martin T60C. I was hoping you could advise me on the airline supply to the saw. I mounted a PneumaticPlus SAU 200A which has a filter but no dryer. I think I maybe should replace it with something like a PneumaticPlus SAU430 which has a 3 stage air drying system along with filter. 1/2 NPT vs 1/4" NPT. This was to serve the pneumatic requirement of the saw. Then I thought if I upgrade to the MAC Airtight clamps at some point, should I try a setup that supplies both? In other words, what did you do? I don't know if the MAC clamps need a lubricator in-line. Many thanks for the videos. I need to re-watch them! Saw is a big jump for me.
