Good day all. I appreciate the time to read and give feedback. I think this is the right machine and price, but want feedback. The time has come. I need a CNC to stay competitive and I also just want to create in new ways. I have “non-buyers remorse” for stopping bidding on a beautiful 5x10...
Last Post By: Wes Grass Today, 12:22 AMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 6:54 PMWe’re gluing old chairs that have come a little loose. Any tips on how to get Titebond in a small crack? Will thinning make it useless? Thank you.
Last Post By: David Storer Today, 4:14 PMLooking for ideas to attach a table top to the base on an outdoor dining table. Thought to use stainless steel figure 8's, but I can only find ones that are @ 7/17" overall length which is way to small. Normal steel units are 1.3" long. Table has a 5' wide frame with a 35" marble insert and a 3"...
Last Post By: STUART Robertson Today, 3:02 PMI have a baldor 7.5HP BALDOR 3450RPM 213T TEFC 1PH MOTOR L3709Ton my table saw. What type of grease should I look for to put grease in the grease or zirk fitting?
Last Post By: John C Cox Today, 4:38 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
I'm gluing hard maple, no need for acetone on the edges. In the past I had a joint fail in Osage wood. should have wiped the edges with acetone then!
Kenneth Moar Today, 9:47 PMAbout a year ago I was reading and found that Vietnam veterans qualified for VA medical benefits. About the same time, I was talking with a neighbor who
Ken Fitzgerald Today, 8:35 PMThrough GF's Facebook forum I finally was able to correspond with someone at GF. They pulled a retainer sample from the batch number the gallon I got
John TenEyck Today, 8:34 PMSistemi will have blade blanks for custom profiling.
STUART Robertson Today, 8:27 PMRobert is the real deal, and a little too modest. He has been in FWW several times before, and is in SAPFM.. His profile has a link to his webpage,
Patrick McCarthy Today, 7:03 PM
Rocks in their heads
Thread Starter: Edward Weberhttps://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area What the ____ is wrong with some people?
Last Post By: Doug Garson Today, 4:45 PM