Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Yesterday, 6:54 PMWe’re gluing old chairs that have come a little loose. Any tips on how to get Titebond in a small crack? Will thinning make it useless? Thank you.
Last Post By: Charles Edward Today, 7:21 AMI have a baldor 7.5HP BALDOR 3450RPM 213T TEFC 1PH MOTOR L3709Ton my table saw. What type of grease should I look for to put grease in the grease or zirk fitting?
Last Post By: John C Cox Yesterday, 4:38 PMLooking for ideas to attach a table top to the base on an outdoor dining table. Thought to use stainless steel figure 8's, but I can only find ones that are @ 7/17" overall length which is way to small. Normal steel units are 1.3" long. Table has a 5' wide frame with a 35" marble insert and a 3"...
Last Post By: STUART Robertson Yesterday, 3:02 PMGreetings All, I’ve done a search here, but all the threads I have seen are old. I would like a recommendation for an adhesive with a long open time for complicated glue ups, minimum 30 minutes,. I typically use Titebond 3 but would like more time for some projects. Sometimes it’s possible to do...
Last Post By: Tom M King Today, 9:05 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Thanks....
Another note for those new to epoxy: When even opening the top of colloidal silica thickener containers, wear breathing protection.
It means mixed resin and hardener with no additives.
Kevin Jenness Today, 8:42 AMMy dads former farm hand is a Veteran of the Korean Conflict. He would have most likely died homeless if my dad had not found kind and clever ways to
Maurice Mcmurry Today, 8:41 AMAgreed. For my practical purposes there's not much difference. For highly stressed joints newer stock may be advisable. https://www.epoxyworks.com/index.php...ife-real-life/
Kevin Jenness Today, 8:40 AMOne question: What is neat epoxy resin hardener? I just don't understand what that means.
edited to add: As a correction to my earlier
Rocks in their heads
Thread Starter: Edward Weberhttps://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area What the ____ is wrong with some people?
Last Post By: Doug Garson Yesterday, 4:45 PM