I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: John Kananis Yesterday, 3:13 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Brian Elfert Yesterday, 4:24 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: George Yetka Today, 9:04 AMOpinions, please on integrated arbor and chuck for a DP. Am looking at the LLAMBRICH Keyless chucks ... integrated 2MT shank/arbor 1/32" to 3/8" (part# JK10-MT2) 1/32" to 1/2" (JK13-MT2) Thanks
Last Post By: Bill Dufour Today, 12:23 AMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Jerry Bruette Yesterday, 11:40 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Nice Grass. When I moved in I intended to do it myself plan was to buy a commercial mower for 3 solid acres of mowing. Time being a limited commodity
George Yetka Today, 9:04 AMThats very clever and striking! A very good job. Having that in the room will be an excellent reminder to stop and put on an album.
Maurice Mcmurry Today, 8:56 AMThe old house in the picture needed some but never had any. Every roof peak was a different angle and each side was a little different. I just figured
Tom M King Today, 8:56 AMJulian, I use a spring pre-emergent with low nitrogen, say @ 18. I try to minimize how much nitrogen I add in the spring since it just makes me have to
Brian Runau Today, 8:55 AMIt matters a lot where you live, and where the piece will set.
Sitting in the shade where mold is prevalent is problematic for any material.
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Today, 8:15 AM