Hi all, I don't look often, but when I do it seems there are absolutely no used mortising machines out there. Something I've always wanted (someday) was a knee mill. There's a place near me that has had a Cincinnati Contour Master for sale forever (years and years). They re build these...
Last Post By: Wes Grass Yesterday, 10:51 PMI used to feel frustrated when I would have listed something for sale on Craigslist or Facebook and included the town where I lived, and instead of looking it up on their devices people would write to me to ask "where is Orwell" (where I used to live) or now "where is Piercefield?". I finally...
Last Post By: Patty Hann Yesterday, 11:12 PMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 11:58 AMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Cameron Wood Yesterday, 2:37 PMGreetings All, I’ve done a search here, but all the threads I have seen are old. I would like a recommendation for an adhesive with a long open time for complicated glue ups, minimum 30 minutes,. I typically use Titebond 3 but would like more time for some projects. Sometimes it’s possible to do...
Last Post By: Wes Grass Yesterday, 11:14 PMSounds like what you really need is an air-to-air heat exchanger
Edward Weber Today, 11:58 AMHad to replace a curvy one..
Had enough "Leftovers" for that..
The wide one on the bottom..isn't quite that wide,
These 2 planks..
Needed to be cross cut in 24" (Roughly) lengths
Then run through the rip fence at 1-3/8" width...
Are you copying the (Dutch? Scandinavian?) guy who made a huge old masters copy in wood that way?
IIRC he eventually got support from
Side #2 is out of the clamps..
And Standing in front of Side #1...back to back...one foot will need trimmed a bit, otherwise, they match
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 3:25 PM