I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Tom Trees Yesterday, 8:52 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Jim Becker Yesterday, 8:10 PMAll these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: John Kananis Yesterday, 10:24 AMI have two exterior doors, one to the back of my house and one to my tool shed. Both are showing the effects of winter water splashing up on them at the base. The door to my shed is really bad. I don't want to replace the doors but would like to put a board over the base, like a kickplate to...
Last Post By: Stan Calow Yesterday, 9:20 AMI glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Yesterday, 6:33 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Dont have a cell but got this used lap top recent. Thought if im out I can check emails and sure enough someone I was going to meet Sat was late and the
Warren Lake Yesterday, 11:57 PMyears back I used to cut the lawn at times for an elderly neighbour or his son in law other times. From cutting the lawn saw two Clematis left for dead.
Warren Lake Yesterday, 11:49 PMTry 30 second cleaner, it does a great job on algae, mould etc. While it is a chemical, it claims to not harm vegetation when used as directed.
Doug Garson Yesterday, 11:48 PMThe old guys wife passed recently and now all four of that family are gone. Two sons included in that statement and I drove home a bit numb realizing
Warren Lake Yesterday, 11:42 PMAfter finishing the top edges I flipped it over to figure out how to get pictures in the back.
I decided to create a recess, kind of like a mortise,
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Yesterday, 12:14 PM