I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: John Kananis Yesterday, 3:13 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Brian Elfert Yesterday, 4:24 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: Frank Pratt Today, 10:29 AMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Bill Dufour Today, 12:19 PMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 11:03 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Looking for a Fuji Mini Mite compatible gravity fed gun, mine got lost and I need to spray some lacquer for my cabinets. Looking for the gravity gun as
Nick Diamond Today, 12:41 PMI probably used BLO, and it is in a shaded, humid area.
I think the power washing and oil got it back to silver minus the mold and looking
One odd result of this is surely thanks to internet tracking.
This morning one of my regularly visited sites was festooned with advertisements
I remembered where a picture was of one of the gable vents on that 1828 house. I had to rent a lift to fix a roof leak about a year ago. I didn't have
Tom M King Today, 12:26 PMLooks like you need something similar to a crowsfoot wrench down there.
Bill D.
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Maurice Mcmurry Today, 9:38 AM