I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: John Kananis Yesterday, 3:13 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Brian Elfert Yesterday, 4:24 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: Brian Runau Today, 1:07 PMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Jerry Bruette Today, 1:23 PMOpinions, please on integrated arbor and chuck for a DP. Am looking at the LLAMBRICH Keyless chucks ... integrated 2MT shank/arbor 1/32" to 3/8" (part# JK10-MT2) 1/32" to 1/2" (JK13-MT2) Thanks
Last Post By: Brian Holcombe Today, 1:10 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Just going from the O.D. you provided here's a link to the McMaster list of SAE and metric locknuts.
https://www.mcmaster.com/products/sp...bearing-nuts~/
I had a gable fan running on my house for a short year nothing but problems. The first side I had it installed cooked the grass and plants because if
Andrew Hughes Today, 1:19 PMSounds good, Jim!
Bill, I agree with your recommendation. FWIW all of the European machines I’ve run into so far have had Morse tapers.
Many years ago when my dad didn't like an increased assessment he called the county assessor and said if he would pay that much for the property, he could
Jim Koepke Today, 1:10 PMRemember that any lip will hold water in. You don't want that. I think it might also be worth reviewing expectations and designs regarding cupping
John C Cox Today, 1:08 PM
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Maurice Mcmurry Today, 9:38 AM