Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Michael Burnside Today, 11:31 AM

Cheap Bandsaw for Resawing
Thread Starter: Jimmy Harris
I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Zachary Hoyt Today, 1:10 PM

Are they building standalone car washes like crazy in your area too?
Thread Starter: Brian Elfert
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Jim Becker Yesterday, 8:10 PM

Epoxy glue joint opened
Thread Starter: Mark Gibney
I glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Yesterday, 6:33 PM

landscaping is my other hobby, record for me, 25 yards of mulch
Thread Starter: Brian Runau
My landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: julian abram Yesterday, 8:32 PM

Rocks in their heads
Thread Starter: Edward Weber
https://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area What the ____ is wrong with some people?
Last Post By: Doug Garson Today, 12:13 AM

Mike Christle

There is no available content written by Mike Christle

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

climatis experts

Climate? I understand frost will cause it to die back aboveground.
Bill D
Bill Dufour Today, 1:29 PM

Harbor Freight 12" disc sander vibrates (only) during startup

As devices spin up to speed, it's not unusual for them to vibrate as they pass through speeds that are not their final run speed and to do similar things
Ken Fitzgerald Today, 1:27 PM

SCM T130 bearing change

I have seen sockets for sale that might work. I think they are designed to remove four wheel drive axle nuts. they look like a giant drag link socket
Bill Dufour Today, 1:19 PM

SCM T130 bearing change

If the slots go clear to the rim then a hook wrench might work. If you have the correct size the solid type shown are better then the hinged ones.
Bill Dufour Today, 1:11 PM

Cheap Bandsaw for Resawing

I'm glad you found a good deal. It sounds like you've got a lot of work to do up front, but I'm sure it will pay off. I had looked at that model of
Zachary Hoyt Today, 1:10 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Mike Christle

Recent Polls

Recent Forum Posts

Recent Blog Posts