Warren Lake
Contributor

its being played through the same TV and the same Receiver,non of that changes Either the computer DVD and audio portion in it is equal to and...

I don't care about recording its only playback what I want to know is now I run a Sony DVD for the picture into a computer or direct to a TV ill...

Thanks Larry, here is how I run the lap top when I had it out, all fits into an old samsonite briefcase. I cant stand the mouse on a lap top so...

You can choke down on stuff I used to use vice grips on the hose to not full close, you have adjustments and can make a very fine spray like a tig...

Agree with Dennis I once didnt hire an arborist cause of a joke he told me. After I said your not the guy. Hired someone else and he was excellent. ...

im guilty of that. I usually dont proof read either so far from ideal. The old guy had poor english at times but good most of the time. I saw past...

get a pressure blaster and you can run it low if you use Aluminum Oxide 25 lbs to 50 lbs will do work. Ive done car parts in that pressure range. ...

Rob you seem to be saying he was making telephone calls from the lap top? is that possible or am I misunderstanding that. If I could use the lap...

thanks Mike I had approached them and came in and saw your post. There were originally two one each side of a door. Told neither will make it they...

wow thats quite the adventure but you got it. After asking upside down then I though the spindle will turn. See you solved that as well, nice...

Up until a few years ago carried my keys this way with the Swiss knife I got in 84 in Venice. The red sides were broken off. Knife in my back...

I get this image. https://www.youtube.com/watch?v=6G_1_T0ec_E

can you turn the machine upside down to work on that.

dont have any with a tab so far and screws are for levelling.

Its marbelous, turns out I wont have to take it for granite cause it is. I cant screw up in case he's watching me. German and that at the finest...

you can figure something out. A tab at the back ive never used anything but should. Ive not used metal ones in over 40 years other than on the last...

Karma falls flat on its face when you look at reality. There are tons of people who have had random crap fall on them and never deserved it. You...

think ive seen a few restored ones, look like excellent quality from the photos.

hows the counterfeit storey now a days Past they were notorious for running one shift of fake everything from hand bags to car parts. It was in the...

yeah 12,000 cars stolen in toronto in one year and just one of all going on. Have to ask my friend how he was hacked maybe he was not in a coffee...

ILl have to check and see when I did put it in for sure. Times flies and the one that died is coming back. I either have to leave the left one that...

there would be no bills only checking my email when im away or googling directions. I did read about VPN's after posting. One friend was hacked...

there used to be a place right in the area so ill check and see if its still there and ask them.

I like the politician who was pulled over by a cop at Queens Park. Said to the cop do you know I am? Cop said no but its on your drivers license. ...

I heavy rust proof then leave it till spring. The manual says power wash below after each winter. Im not set up to that and once did hire they didnt...

Last wadkin I saw sell was 800.00 plus had 8 chisels with it. The wadkin was likely 40 years old and irrelevant that it was.