Search:

I turn my 3hp Oneida on and off as needed. Sometimes that means more than 6 times in an hour but usually not. If I know I am jumping right into another cut, I will leave it on. I like to have the TV...

Love this. Where did you find the hardware? I will be making a similar styled dresser in the future and really like this piece. Thank you for sharing.

I went with the 5000 sled because it allows me to use a sled while keeping my SharkGuard installed. I like it a lot, but it is large and heavy.

I think the 5000 sled paired with a smaller simple...

Last year I was on the list for a G0490X jointer and the backorder date kept getting pushed back. I canceled the order when something came up on craigslist locally. Recently, in September, I ordered...

I tend to keep my finish process simple, but have been very happy with the results I have gotten from using general finishes water based dye stain in the color "light brown"
You can see the attached...

Jerry, I have been using my V3000 for ~5 months and could not be happier with it. I fill up the 35 gal dust bin about every 2-3 weeks if that gives you an idea of the usage. I have not had to empty...

Marty,

I am in the early stages of my 1" RK blade and my impressions are mixed. I do not have any warranty experience but I nearly sent mine back when I opened the box and found the blade,...

Is it ever necessary to have the miter gauge with the extrusion far enough over so that it could hit the blade when adjusted back to 90? When you have the extrusion close to the blade at 90, and then...

What is the conundrum? You need either an appropriate cartridge for the blade you have, or the appropriate blade for the cartridge you have. This is not a hidden cost of the sawstop, but one that is...

Just dont cut the ends, i wish i didnt. Not only would you avoid screwing up your "straight edge" but it would give you a visual of where to safely start and stop your cut. I tried to cut them with...

I just ordered the 18bx recently. Have not received it yet, or seen one in person, but I went with it over the 14bx out of fear of needing (or just wanting) to upgrade the 14 down the road. I have...

Kayleigh,

It sounds like you may already understand this, but be careful of a couple of things:

Whatever you apply to the top, apply it to the bottom too. Do not seal the bottom with a varnish...

I am in the process of installing my Sapele countertops now. The finishing process is not compete, but this is what I did:
First coat was "Dark Walnut" stained danish oil. I let this dry for three...

I just received and used my Makita track saw for the first time this weekend. I am impressed, and feel like it is a good value at $409 with a 55" track included. Cuts very straight and square,...

I would buy it based on the price alone. If you like it better, sell your Unisaw (or better yet keep and use them both). If you don't, sell it for 1.5K!

I have the 1.75 PCS 36" and love it. But......

If I were you I would grab the PCS just because of the price. If you like it, great! If you don't, sell it for 1.5 times what you paid....

I have the 1.75 PCS and it is great for me. I have never...

I had been waiting on a backordered Grizzly jointer for some time when I found a DJ-20 on craigslist with Byrd Shelix cutterhead. $1100 which i feel like was a great deal. If it did not have the...