Final followup: Eventually took off the top and it seemed there was alot of packed sawdust and a piece of wood wedged around the trunnion. Once cleaned out, everything seemed to go together well and...
Type: Posts; User: Tim Reagan; Keyword(s):
Final followup: Eventually took off the top and it seemed there was alot of packed sawdust and a piece of wood wedged around the trunnion. Once cleaned out, everything seemed to go together well and...
So I took out the shaft that goes from the front handle to the back of the saw with the worm drive on it for raising the blade out of the saw. The bushings and shaft look good, but when I place it...
please include me.
please include me.
please include me.
please include me.
please include me
please include me.
please include me.
I'm in and dusty!
To me the gears look perfectly clean. I wonder if I'm looking at the right gears?...
I have a about 8 year old griz 1023, and have noticed it quite difficult to raise the blade up and down. I have unscrewed the lock knob and coated the gears with dry graphite lube without difference....
Just got off the phone with Grizzly, they said that it is a wear item and since I am 1 month out of warranty they cannot help me. A little dissappointed because my saw probably only has 40 bf run...
Thanks for the ideas. My saw is only about 1 year old. will call grizzly first, then try tires that van recommends if they are no help.
I was trying to adjust my Grizzly 0513p to have minimal blade drift when I noticed the tire spun irregularly. I was then doing some cutting and the blade started to wobble, and as I turned it off to...
here are some cut pictures. The spark was toward the end of the cut, but duly noted about it being likely done.231962231963
great thanks. I will try to get another pic of the cut up today. Van, the blade is actually from the company you recommend somewhere in the midwest (spectrum supply, dont know actual blade brand),...
I am new to resawing and have read quite a bit here about proper setup. Here is my most recent attempt to resaw 10" mahogany (previous stair tread given to me). The first pic is the entrance cut,...
I received all 3 pieces of mine yesterday through CEVA if great shape. Thanks to OP frank.
Thats exactly what I used and would do it again. I like the light interior and prefinished takes away so much more work.
http://www.sawmillcreek.org/showthread.php?134728-Cherry-Kitchen&highlight=
I'm in.
Thanks Mr. Huber
I'm building a bench with shelves underneath for shoes, and was wondering how others glue a center shelf in 3/4 plywood with dado's at the same spot just on opposites of the vertical center support....
I bought the 0513p when it was $695, but it is now higher and I think woodcraft has the rikon for $749 now. I think both are good saws.
just got it thanks.
I get a fairly regular email about their current email special, and tossed the last one out. Could I please get the code/link from someone who still has the email?
thanks,