Thanks Bruce...will go with 8-10 which should be ok.
Type: Posts; User: Chris Barnett; Keyword(s):
Thanks Bruce...will go with 8-10 which should be ok.
Back to the same problem again....loud clatter on shutdown. Had not needed the jointer for quite a while since other issues were dominant. Have taken the sides off the G0490 to make a slow motion...
The power supply is two wire with ground; I plan to continue the ground wire separate from neutral unless advised otherwise, and ground would be connected to the box if metal. Don't know if this...
Diesel was the preferred option, but with the new regulations on diesels, they have just about destroyed the benefits. Diesel's major benefit is that they would have lasted hundreds of thousands...
Am finishing my rounter cabinet [been gathering parts/materials lets say, years] and want to know if there is a reason to use plastic instead of metal switch boxes, or vice-versa. Have metal but I...
Thanks for all the info....have been away and could not get back until now. The wrench is the open end for the shaft, not the closed end for the nut. I usually just snug but while putting in on last...
Need a flat 22mm open end wrench for a Grizzly 1023 SLW table saw, i. e. a flat wrench with 22mm jaw. Having read about a disaster when a blade came off an arbor, cinched mine down well. The wrench...
Yep, many thanks for the reminder....my Griz jointer is still banging very loud on shutdown, even after checking the setscrew and locking screw above that one on the motor pulley.
Will be installing garage doors soon also, and had previously wanted, and still do, wood doors. Also have the T/G cedar on house, but thinking about it, wonder if the weight will be higher than...
Have put the Woodcrafters orange lockable casters on my lathe, steel framed welding and tool carts, a moveable workbench, and on my in-process router cabinet...need to install sides and bolt on top. ...
I bought a damaged piece of marble tile from Lowes (corner broken, only $1...they should have given it away but...) to which I attach sandpaper. It is lightweight but if broken, no big loss. Thinking...
Yes, please...an even smaller driver would be nice. I was in that store yesterday, and noticed the Dremel display but then walked right by and didn't even look. I must be getting senile (or old). ...
The Rigid looks promising, had I not already bought the Bosch PS31 and PS41 combo on sale for $179 at the big box store known for home remodeling etc. (the other is contractor support). The PS41...
Many thanks guys. After reading your reponses I looked at the info on these tools. First said two speed, same as I had seen elsewhere and rejected, but since you had recommended, looked further into...
Guys/gals who have no sons who might be interested in woodworking, but do have daughters can consider that those daughters might later have a spouse with an interest or have children who would [or...
Looking for a pocket [small size] cordless drill. Have found several but seems that cordless and variable are mutually exclusive for what I have found.
Brown truck arrived today with what I thought...
The set screws might be for the motor pulley. I had terrible vibration [shudder] problems with mine when I pushed stop; Grizzly CS said the set screws might be loose. They cautioned me that they are...
No photo or whatever was attempted to be shown...only a red x.
Deleted. Information found in manual on web site.
Clockit. They have the larger faces in glass if you look carefully.
The instant-on small CFLs are now available which should solve that concern. Regarding unappetizing food, well...could be the color temperature of the CFL or.....maybe something else. The CFL is...
If one uses a high number (i.e. 40) viscosity single weight oil in engines designed for multi-weight, the engine will not have proper lubrication except perhaps only at a high temperature. The...
Better to find on the driveway instead of the highway. Have seen as bad recently here in Knoxville, in line with the driving lane, and actually quite close to the UT Hospital....where they are...
Wonder what they do with al that used motor oil that we take back to Walmart? After all the long molecular chains are broken, they wouldn't just filter, dewater and repackage and sell to us....would...
Amazing!
I refused to purchase those gasoline cans for the same reasons and agree 100%...they are dangerous. Where is Ralph Nader when you [don't...and never did and never will] need him...