Search:

Hi Burce I got some here. mcmasterdotcom the company is mcmaster-carr

Try the table tool.

Kevin maybe i spoke too soon I am getting the same thing.No Idea. I just reconstructed the cross from the shield and the u-shaped object by replacing the nodes that were skewed.

Hi Kevin. just copy and paste the image from the site to x5 that should do it. I did and it came out fine.

Bryan,in my print driver there is an option called cluster that will do what you would like to accomplish. I don't know what type of laser you own but, check to see if yours has cluster. I don't...

Jeff, you have open paths that needs to be closed. I think you should re-draw with the bezier tool,then you will be sure the paths are closed.

Garrick I had that issue and i now have three harbour freight inline traps on my compressor no more moisture problem. Most of the moisture is in the second trap which i drain periodically.

Mike when you say the compressor runs constantly, do you mean whether you are running a job or not? With air assist it should only run when a job is on. With my laserpro spirit there are two outlets...

Thanks, I tested the cluster function, it works great. I stepped and repeated the artwork, 4 rows, 4 columns, with them ungrouped(did not work grouped). I send to laser, each item was lasered...

Hi I have to do a series of these, I have made a template for 16. How would using cluster help and what setting do i have to put in. Is the distance in inches the distance between each item? The...

180429180428180427180426 These are laser tiles 75p 35s 500dpi. all done with Corel Draw x3 LaserPro Spirit 30W

I use my micro-meter to check the depth,more important is the fit,I do an outside contour of .001" for the rastered area ...

Thanks Dee, It was tiger maple veneer on birch

Here is the first one i did. 179717

Hi Kevin from what i see you do not have to lock the red template, just add the text to the template, select template and text, go to arrange, align and distribute, align center horizontally will...

How about placing your text or image select all then go to arrange order reverse order then your image or text will be at the front of the workspace select the template and lock it then do your...

This is weird no one gave any advice to Paul Grothouse

174205174204174203174202174201Ok This is a cut without flipping.

All i am saying guys is the answer to the first post by Paul Grothouse if i could cut 1.5" clean cut or not with my 30w he can more than likley cut it with his 150w and get an acceptable result. Lets...

Thanks Paul, It is a 2.5" lens. I just realised if i had taken off the nozzle of the air-assit i would be able to go all the way through with-out flipping

I agree with you guys I will not let it out either. I believe the next time i cut 1.5" it will be a smooth cut now that i know what to do and that it can be done. The purpose of the exercise was see...

Scott, it was just a test. I think the reason for the Striation was i did not support the piece that was to be cut and it moved as it cut deeper. If you look at pic #3 on the right the cut is smooth...

174138174137174136 The ridge is when i flipped it i was off a little but again it was just a test

Dan. what did they say about a picture? Something about a thousand words. With the auto focus on my machine i was dead on, there was no flareup not even a spark. It took about 20 5 seconds passes.As...

174130174128174128174127174126174125Very slow I was just testing, it was a straight cut. I cut 3/4 through then flipped and finish the cut174129