Might try keith rucker at vintage machine he may be able to help here is a link to his youtube channel https://youtu.be/O-QIWwW1LOs?si=Bg8ZCmRBiWDAF4Ia
Type: Posts; User: Ted Baxter; Keyword(s):
Might try keith rucker at vintage machine he may be able to help here is a link to his youtube channel https://youtu.be/O-QIWwW1LOs?si=Bg8ZCmRBiWDAF4Ia
I wouldn't use dryer sheets they contain fabric softner in them which will cling to the lens. That said a dryer sheet with fabric softner and a little water is great for removing bugs off of cars and...
I agree with Ken
My son works at the local WC store the owner owns 4 stores in diferent states. He said the owner plans on closing each store as their leases come due. He said having to compeat with WC corprate and...
I have the SS contractor's saw shown in the photo above. I used a ban clamp bought from Lowes it has never come off in over two years of use. Just make sure to force it as far on as possible and make...
I don't understand:confused:
You can still download the manual for the machine from Grizzly's site. I did just a few days ago. Call Grizzly tech again until you get the right tech who will help you.
Thanks for the sources I think I can get better peace of mind buying from one of these than the ones that came with the laser
New to laser engraving I have a new diode laser 20watt 455nm output and I need a pair of safety glasses or goggles to fit over my glasses any suggestion would be aappreciated?
I am not sure what...
The side cutter can be turned of if desired. I was a little surprised at the price giving the 10' width cut and three motor's . I have no need if it but I'm sure there are people who could make good...
Check out his recent video interesting new equipment I was suprised by the price https://youtu.be/l8PeLbHjwco
I put mine on the wall today.
The sawstop system uses an aluminum block to slam into the blade and stop it as it descend's under the table. You can search videos on youtube that show it in slow motion,
Thanks for the comments maybe I'll just nail the whole thing to the wall like it is.
I tripped the brake on my saw I cut through a glue joint that was only about an hour old. I never gave it a thought before hand.
Is there a good way to remove the brake from the blade so I can...
I am not sure he talked me through some steps pushing the mode button and restet button and pluging and unpluging the lathe took quite awhile but it seems to run fine now. Thanks to a good and...
I got a hold of a different Tech at Grizzly support today and he was able to trouble shoot my VFD issues with me and I now have my lathe running again.
It took quite awhile on the phone but all...
Update I think the problem has been discovered. The AC crew replaced a copper tube because it had a ragged hole about an 1'-1/4 long and burnt around the hole.
I appears the house was struck by...
We have had a major remodel in the kitchen down to bear studs all new wireing for the kitchen including adding a new service panal to a 200amp.
When they were all done and switched the power back...
I am hesitant to buy used electronics but may consider it. It has gotten worse it warmed up enough yesterday afternoon that we turned on the AC it runs none stop and doesent't cool.
Also it seems...
Looking for a new DELTA VDF-EL for my G0800 electrican fried my clothes dryer, frige, and lathe. Any suggestion where to look for a replacment and a reasonable price?
You might try Andy Klein's "Bandsaw Tensioning" app avalible in the apple app store for setting/checking the Tension. He has a youtube video demo it.
Grumpy old men;)
I am trying to heat a "400" sq. ft. insulated shop. It was heated by gas but that is no longer avalible.
I was thinking about a celing mounted unit. I live in OKLA US and it gets very cold here.
I am looking for heating options for a 400' sq ft shop. Anyone have experience using Radiant heat? I don't understand how it works. Will it heat the whole space or just what is in front of the unit?