Have you tried, before you turn on the saw, to manually turn the blade or pulley in case the belt has taken a set?
Type: Posts; User: Andrew Ault; Keyword(s):
Have you tried, before you turn on the saw, to manually turn the blade or pulley in case the belt has taken a set?
Cold India Pale Ale after working in the sun for a few hours.
Cheers!
- Andy
Rockler carries link belt by the foot:
...
I have the Delta tool. I bought it because I wanted a 12" CMS and it was being closed out at my local Lowes. I like it because it seems to be well thought out in detail. Mine is very accurate and has...
I found a PDF for a guide bushing adapter for this router. It is at:
http://oneworld1.inetu.net/manuals/ryobi/4070177_500_bushing%20kit.pdf
- Andy
I use a marking gauge to layout mortise and tenon joints. I happen to use the Veritas Wheel Marking Gauge like this one:
http://www.leevalley.com/wood/page.aspx?c=2&p=42440&cat=1,42936
You...
White glue is also runnier than yellow glue.
It stays the same distance from the blade regardless of travel. I examined it locally and was very impressed. If I did not already have a saw, I would consider this one.
Yeah, my Unisaw gets grumpy when it sits unused.
When I first got it, it threw a breaker when I turned it on.
Manually turning the blade a bit before turning it on did the trick.
Now that it...
I use the one from Lee Valley with magnetic holder.
I make a test cut on a scrap, measure it with digital calipers and then tap the fence into place while watchind the dial.
I do this when...
Gary,
I use a Biesemeyer. I was planning to make some sort of micro-adjust mechanism, but instead, I've developed another method of micro-adjustment. I just stick a 1" dial gauge to the iron table...
Woodcraft has Sandflex blocks for a little less than Lie Nielsen - though more than Mcfeelys.
http://www.woodcraft.com/family.aspx?familyid=7329&refcode=05INFROO
I call mine a rust eraser.
I...
I'll look for that issue at the library.
I always learn alot from Bob Smalser's postings. In addition to thinking through to the desired result, I also try to learn the physical skills and try to...
Jon, the wheel at the top is for adjusting the variable speed.
It has a 6" quill travel and a really nice depth stop.
For $200 more, the high end model has a digital display for RPM and quill...
Could you laminate (thicken) just the part of the top and bottom where the lock goes? ...And then use the lockset you purchased?
- Andy
Spanish cedar is a stable, relatively light wood (compared to mahagany, it is a little lighter in weight). It is used in clasical guitar necks and some cigar humidors. If you have a Rockler nearby,...
If you sand it, does it have a pepper smell?
Don,
Thanks. I've been in the woodshed and have been avoiding the web.
I probably have a few more months of work before devoting much time to other things. Meeting Sam M. caused me to...
...just an hour south...
Frost Hardwood is on Miramar Road in San Diego, near 805.
6565 Miramar Road
San Diego, CA 92121
858-455-9060; 800-258-3534
...
Ouch!
Thanks for sharing your experience. I hope it will help me (and others) keep learning to work safely and to be conscious and careful.
Heal quickly and well!
BUT, it worked. Good going!
I hear ya' brother. They sure are good clamps. Could use a couple more 50 inchers...
Must remember budget, must remember budget...
:-)
I guess the local manager had a different idea.
That's Ok. I'll continue to use what I have for a while. Not a problem.
I got a flyer in San Diego. Used the 25% discount on a first aid kit. I also bought some diamond hones for half price.
There was a sign on the PC dovetail jig - no discounts. :-(
I did not buy...
We just got NetFlix. So far, it's been great.
My BIL has the Blockbuster version. They give him alot of coupons and stuff, which he likes.