Bump.........
Type: Posts; User: Bob Kalb; Keyword(s):
Bump.........
Bump to top
My shop shares a two bay garage with one car. One bay houses all the shop equipment, most on wheeled carts to allow easeof transition into various working configurations utilizing the second bay.
I...
Thought of doing that, not possible, would have had to anchor the receiving bolt into the mdf with a machine nut & there is not enough depth of material remaining after routing depth slot to receive...
Finally got tired of dealing with the poorly designed Festool Guide Rail Deflector. I decided to try my hand at making my own. I wanted several must have features which were missing from Festool's...
I have made additional modifications to this unit - for updated info check out original posting at this link -
...
LOL Thanks Dave - did not know I was violating the creative thinking code!
Link for ordering parts - http://www.festoolusa.com/service/spare-parts-catalog/default.aspx
I was fortunate to find a Festool #494071 MFT 1080 Hardware Kit on e-Bay which provided me with all...
The track was Lee Valley 48" with 5/16" T-slot. Cat# 12K79.38
David
The top section was built first using my table saw & router table to fabricate the frame assembly that I then mounted a Festool MFT/3 replacement top into, added 1-1/2" PVC legs & T-track....
Just finished my custom built mobile expandable MFT and thought I might share it with this forum
My shop shares a two bay garage with one car. One bay houses all the shop equipment, most on...
James
Almost all panels nowadays use alternate buss positions in a vertical line, however there are some rare oldies that did not account for two pole circuits and put alternate buss left right....
Can you tell me the physical locations of the two GFI breakers in your panel. You refer to them as upper & lower. Are they adjacent to each other, or are they separated by other regular circuit...
Ground Fault Circuit Breakers are designed to operate on two wire circuits only. If the original wiring to your outdoor outlets was done utilizing a 3 wire circuit ( two hots & one neutral) and the...
I have my Festool plug-it cord that came with my TS-55 attached to my extractor hose with Velcro straps to prevent tangle. The plug-it cord is 13 feet long and close in length to the hose, my...
I own several non-Festool tools which I need to connect to the dust extractor and have come up with a relatively simple solution. Instead of trying to obtain a few of the plug-it pigtails (almost...