I made my table with a frame out of red oak and 3/4 plywood for a top covered with formica on one side. I routed parallel slots on my table and fasten the fence with tee-slots so I can remove easily....
Type: Posts; User: ron ogle; Keyword(s):
I made my table with a frame out of red oak and 3/4 plywood for a top covered with formica on one side. I routed parallel slots on my table and fasten the fence with tee-slots so I can remove easily....
thanks for all the replies I had not thought of checking the fence but I did think of skewing but it is burning on both sides, Ron
I have a bosch 10 inch and have problems with binding and burning.I am a using forrest chopmaster.If I dont do a relief cut by chopping down first on hard 1 inch wood when I try to start at the front...
wax, sharp cutters and glue sandpaper to old paddles.
many thanks to all,points well taken Ron
I would be leary of Powermatic. I have 8 inch planer with Byrd cutterhead. Cutterhead is great but it looks like the company that bought out Powermatic is just using their name to sell far east...
I am considering a new cabinet saw and was thinking that my main reason is more power so why cant I put a 3hp motor on my 20 year old Delta contractor saw which is ok otherwise?
Dont know anything about General but have Byrd cutter on my 8 inch powermatic joiner and it is great.[ wish I could say the same for the rest of the joiner] better than 99% no tear out on hickory...
I have been using a 2hp grizzly for 15years and no problems
Does anyone own a TRC 001 ? I am trying to find out how large the opening in the base is. Will it take a 3 1/2" dia bit ?
I am looking for how large of a diameter bit will fit the opening?
Does anyone own one? I am getting different answers as to how big of a bit will fit. Thanks Ron
I have an 8 inch joiner with byrd cutter head but have not rotated any cutters yet.byrd head is great and any scallop is gone with 150 sandpaper and a few seconds. I will not buy a tool without these...
I didnt think I was bashing a company but telling my experience with this machine. This machine is very heavy and was purchased 100 miles away so its not like dealing with your local hardware where...
I have a new powermatic 8inch jointer with the byrd cutterhesd. The cutterhead is great.I had an older 6 inch powermatic and believe me this is junk compared to that.It took me several hours to get...
Have 8 inch powermatic with byrd cutters.Cutters are great ,jointer is not.Just another off shore piece of junk painted gold.powermatics good name is done for.it took me several hours to get the...