Search:

I have a fence I bought / traded from a guy 10yrs ago on this forum, looks like a cross between a Uni and a Biesemeyer.
The fence is a "T" style with the square tube in the center and poly sides,...

Be sure and measure your inlet diameter! My G0440 came with an 8" inlet and the standard 2hp 7" filter and outlet. I bought a 7" x 6" HVAC reducer and then a 8" x 6" reducer on trip #2 at Lowes.

I will see what I can fab up. May give Sharaz/ Grizzley tech support a call and see what help they can offer.
Thanks for the advice.

I bought a Grizzley G0440: 2hp Cyclone about 5 yrs ago, installed it with 6" piping and 4"drops.
Worked great. I had to break it down about a 1 1/2years ago and am in the process of setting
it...

About 5 years ago I bought 15" planer, 8" 490 jointer, 17" Band saw, 1 1/2 hp shaper and 2hp cyclone. I pm'ed Sharaz and ask him if for a discount and he cut me a break on the shipping, seems like...

Bought one when Grizzly clearanced them out. Compared to the HF bench top was a giant leap forward
Go to the Laguna website and look at its twin. Identical stops, table lock, handle pull and...

I believe Homier, the truck sales co used to sell that brand. Seems the tables shorter like on the 6" Rigid I had at one time.
Almost bought one myself several years ago.

I agree with Dave, Have multiple Bessy's K-body and woodcraft and HF clones. I usually reach for the Stanley/Bailey clamps first. Only complaint is they will leave a black spot if I forget to use wax...

Have you considered the Steelex in the Grizzley catalog? I found many good reviews and if you check out the Laguna Platinium, it looks like one of them is a rebadged copy of the other down to the...

Isn't it funny how all this stuff makes it all the way from China or Tiawan to Griz's warehouse, but can't make it a few hundred miles by UPS!!!

I use canvas drop cloths on all my cast iron tops, along with generous coatings of johnson's paste wax. We recently had a couple of weird days of weather, patio and most surfaces dripping wet. Friend...

The problems with the early Delta's really gave them a bad reputation that just will not seem to die. I bought a new X-5 2 years ago at a price I just could not refuse. I was leary because of the...

Has any one else tried these? I picked up 2/18", 2/48" & 2/60" clamps at A Big Lotts for $80. Checked them at home with my Engineer Square and the were dead on and I really like the padded triangular...

I hung my 2hp Griz Cyclone on a wall mount by myself. I partially assembled it, used a shop crane to lift it on a hydraulic lift cart with a 55 gal drum and 4x4 wood blocks. Lifted straight up and on...

Eddie, where do you buy your wood?

According to his producer, Russell Morrash? there are not enough bloopers to fill 25min a show out of the 19-20 years of filming. He would probably make it if he thought he could sell it,

Larry, if you have a Griz Cyclone it may work for that too! My Griz also starts my Jet Air cleaner. Contacted Grizzly Tech Support and they said there is no frequency to reset,Sooo, I just have to be...

I bought a Jet cabnet saw with w/ 52" rails, couldn't get what I wanted for my Delta platinium contractor saw. Replaced the table to the left of the Jet with with the Delta. Takes up the same space...

I've had that unit for 3-4 yrs. used it last night with 2 3/8" fostner for mounting clock works in a small mantle clock. Works beter than the Delta VS bench model I bought from Lowes last year. I...

Just recieved the Griz (Green Twin of the Jet), almost 300# With 25" x 25" cast iron table 10 sizes of spindles 1hp! A considerable step up from my little Ryobi bench top. Thanks Pappa G! Two day...

I think I bought the last one, I bought one of the last 18/36" drum sanders about 3 mo. ago and I haven't seen any more from Amazon. Must be getting rid of the bases too ! Lucky Me!!

Ken, Born and raised in West Texas! Started out life with a burnt orange teething ring. I've been stranded in the land of crimson and cream so long I want to scream or puke or both.

White with burnt orange trim!!

Sorry to hear of your problems with UPS. I recently received a five piece delivery from Grizzley via Saia, a490 8" jointer, 15" planer, 17" band saw, 11/2 hp shaper, and a 2hp cyclone. Order in on...

Ken, I also am the proud owner of a new Grizzly 0490! Everything Don said I agree with . I have a 6' Starret straight edge to test flatness of the tables, unit was dead on right out of the crate. The...