There are places like discountairvalves.com which are airtac distributors and should just be able to get it for you.
Airtac also has a us sales operation if you need.
Otherwise, these are dead...
Type: Posts; User: Daniel Berlin; Keyword(s):
There are places like discountairvalves.com which are airtac distributors and should just be able to get it for you.
Airtac also has a us sales operation if you need.
Otherwise, these are dead...
As someone who does a lot of professional finishing, you are getting a lot of weird answers here.
It depends on the use of the dining table top and what you want out of it :)
If it's...
Arm-R-Seal is legal and findable in just about all of california, just in quarts rather than gallons.
Even Amazon will ship it to you in california:...
The issue is actually simple: It's 100% VOC.
It was historically exempt.
It is no longer exempt.
Onwards in the march for california to replace all chemicals with ones that are better for the...
This is a pretty strong assumption.
In fact, i'd assume it was the opposite.
Geetech or someone is producing the main plans, and each manufacturer is tweaking them.
That's how ODM'ing normally...
Hey Fred,
I have a few spray guns from CA Technologies, and they've been nothing but helpful and pleasant when it came to supporting them.
They also work wonderfully (I use them to spray...
"a lot" is an understatement.
I've fit a 5'x32" bathtub in the back of our 2008 prius before (rear hatch closes just fine with it in), and often use it to grab lumber shorts (6' and under fits...
Just as a note, by "Trade organization", they mean "lobbying organization".
They spend a couple hundred k a year lobbying the federal government (more in state governments, where reporting laws are...
Derek's right, and these are good things to check out.
But let me suggest another possibliity
Green compound is generally rated by average particle size. Since there is no real standard for green...
The manufacturer name you may be thinking of is "Asturo" (as they are commonly known, the full name is "asturo originali maves").
They make a number of nice guns.
Jacobs makes nice chucks for drill presses. Prices vary pretty wildly, i usually google the model number ;)
If you are truly crazy, they even make chucks with integrated shanks and guaranteed...
On all the heads I replaced, it took a hammer to replace them.
I agree the original head has bearings of the same size.
However, at least the the replacement indexable head they say fits yours...
Can you take a picture of the protrusion?
I've replaced a bunch of grizzly cutterheads (though only on g0490's), and they fit quite tightly on both bearing blocks.
The bearing is also completely...
This is completely true, the real issue he may hit is that it's not possible to thin it enough and still have it properly form a film/etc.
Most of these manuf's have a real recommended reducer for...
I have a grizzly one that i bought last year, and used it for 26 picture frames (my wife wanted to reframe roughly everything with nice cherry frames :P). They are exceptionally good at what they...
You definitely can't do #2 unless the conductors are individually labeled. For starters, 110.3B requires you install a product per the listing and labeling, and you wouldn't be doing that (there are...
This is theoretically true, but in practice, studies of HVLP guns have shown technique matters a lot more than the gun's theoretical overspray amount with current guns.
Even people who have been...
You can put the baffle right in the DC, it works great.
Note that Phil says he tried the vortex cone design early on, and found it worse than the design you see on his website.
Phil has a...
The viscosity of what you want to spray. I don't know if Jeff publishes the specs on viscosity vs nozzle+needle size in the manual, if not, ask him.
Turbines are also more portable, require no fiddling of knobs to get the right CFM and pressure, and less susceptible to contamination issues.
As for compressor with a turbine gun, there are some...
DevilBiss QC-3.
Not horribly expensive, no real pressure drop, filters down to 0.1 micron, has a regulator on the outfeed, etc.
Replacement dessicant cartridges are 40 bucks a piece, and last...
So, i've used cheaper versions (You can get diamond discs from lapidary supply stores) on my worksharp, and they work well.
DMT makes good stuff, i'm sure they are just as good if not better.
...
Interesting. This was about 6 weeks ago when i priced it out at home depot/lowes and decided to go with benchcrafted instead.
Yeah, but you have the tooling to do so. Otherwise, it would cost a lot more.
I thought they were over priced till i received them and saw what they were really like.
To put it in perspective,...
Sorry, it's not, and they don't.
1. AFAIK, All sharpening at forrest, except for tooth repair,is now done by CNC based sharpening machine. They do quick checks of blades to see if they are damaged,...