I am looking at building a work bench
Top out of soft maple, legs oak
what ways are there to connect to the legs that are removable
not that I am going to move it often but to be able to break it...
Type: Posts; User: phil harold; Keyword(s):
I am looking at building a work bench
Top out of soft maple, legs oak
what ways are there to connect to the legs that are removable
not that I am going to move it often but to be able to break it...
Oh the festool router and vac combination is awesome
I routed out 3/8"x 3"x 36" channel in MDF in a client's kitchen
cleanest routing of MDF in my life pretty much dustless
I have seen this done...
https://www.youtube.com/watch?v=8k50b7xkkuk
Don't use a graphite lubricant!
DAMHIK
The More the Merrier
Limiting your self to US or Europe clamps limits how many clamps you can afford
C- Clamps
Bar Clamps
F- Clamps
are my most used ones
then comes
Cam Clamps
Wood...
I just tape a 12x24 merv7 filter in front of my ambient air cleaners/ I change it when it looks dirty every month
Extends the cleaning of the primary filter it came with
and multiple filtration...
It would work for 5 months of the year, here
;o)
54" off the floor
or more
need to lean plywood against the wall without it interfering with the outlets
Take it!
Set it up without any filters and have it vent outside
Nothing ventured
Nothing gained
The way fluid dynamics work, you will not change all your air in five minutes.
If you can design a fresh air intake in close proximity of the most used tool with the dust collector, you will only...
call these guys they should be able to help you
https://www.ducting.com/hose-types/metric-hoses
I don't know if this has been posted before
But I want that turning knife
...
$64 for 12' foot of base cap
WOW!
get twice the baseboard you need cut the profile off with some extra then rip the thickness down to bendable thickness lets say 1/8" make laminate the parts back on the wall with glue and nails
...
Thanks John
But alas they had no enduro
:(
I will be going to a business that sells general finishes
I heard they are good
Which clear waterborne one should I get?
Do I need a sealer for it?
Just would like to have gallon on hand for my...
Norman built a concrete one years ago
https://sawmillcreek.org/showthread.php?106663-Making-plans-to-build-a-concrete-bowl-lathe-opinions-welcome
End to end
There seems to be so many different styles and prices
I built an "A" frame years ago
has wheel but just sits
I love the inside storage
404385
404386
Micro bevel?
would that be a lot smaller than the original poster's picture?
As a mechanic you understand the value of good tools
Get yourself self a good cabinet saw 3hp
I actually use this daily
Fits in a nice nook in my van
And seems like I am always plugging a three way into and share my air on the job site
It keeps up with demand but I keep in another room...
Possibly:
Corner stud
King
Jack
Cripple
That would be 6” minus 1/2” for Sheetrock
An extra cripple or blocking would give you seven inches
I never trust a stud finder
Finger joint router bits
Which one do you like?
I see some that are different styles
Does one brand last longer than others?
Yes I assume a shaper would be the best option but I only have a...
I have used both
I own the rolair
The senco is lighter but less capacity
Sound level is the rolair is quieter in my opinion
If you are only going to shoot 18 gauge nails
Get a ryobi cordless