247669
The boxes above are made with cocobola. I wiped the joints liberally with Acetone then used Titebond II. These were build 2 years ago and the joints are tight and the feet are still...
Type: Posts; User: Paul Muhlstadt; Keyword(s):
247669
The boxes above are made with cocobola. I wiped the joints liberally with Acetone then used Titebond II. These were build 2 years ago and the joints are tight and the feet are still...
Hack saw - 18 tooth blade
reciprocating saw - 18 tooth blade (slow speed - not full on)
Paul Muhlstadt
Kankakee, IL
I get my small screws for this purpose from my local Ace Hardware. They have everything down to screws for eye glasses. And they help you find what you want.
I used these, http://www.rockler.com/product.cfm?page=410&site=ROCKLER. Using the formula, this box lid required 195 lb support. I chose 2 each 125 lb supports. The lid stays where it is raised...
Be careful. That's how I got hooked in woodworking. Made toys for grandkids. Then parents, aunts, uncles, etc. wanted them too.
Best of luck though. As far as color. Different woods that...
Thanks.
I hard wired in series so I guess I will have to unwire and then jumper each one.
Darn, I bought them from the local contractors supply house. Paid extra because I thought
they would be...
Replaced the lights in my shop with new T-8 flouresent (8 each 4' 2 bulb) Now I have static in my radio/stereo any time I turn them on. Any Idea how to fix this?
Paul Muhlstadt
Kankakee, IL
Thanks Will. Somebody told me the idea was that you shouldn't see the tenons when the job was done :). Yes it was made for that spot. 34-1/2" wide.
Don't want to hyjac this thread but...
I have the Delta on my Craftsman. Had same problem. Screwed a piece of 3/4 baltic birch plywood to the face so it would reach closer to the blade. If you do this, make sure the piece is mounted high...
I would most certainly like to help you out but I'm afraid I am too far away. I have a G0437 which has a 10" saw height so that would be no problem. I am surprised someone closer to you hasn't...
Thanks everyone, I have a couple pieces left over so I will try both this weekend.
Brother-in law gave me some cocobola from Hernes in PA. I'm making a box out of this stuff for him and was wondering what to use to glue it together. This is some nasty stuff but I have the pieces...
Add my name to the list please
Count me in please.
Count me in please!! Thanks
Count me in please.
Please count me in on this one.
Thanks
Paul
Truck plan is from "Toys and Joys". Don't have the address with me but I think you can find him on the net. Great guy to work with!
I forgot to insert the picture for the combine. Copied it...
Scroll saw baskets
Truck
Scroll saw bowls
skidsteer
combine
Sorry your so far away. Not worth shipping it.
I'm getting rid of it because I want to resaw more than 6". I'm also tired of the pully coming loose. When this happens, the belt rides up on...
Mike, where are you located. I have one about 60 miles South of Chicago I would let go for 1/3 that price.
Thanks everyone for the help. I have an electrician comming to look at putting a sub panel in. Thats what I really want to do.
Just to explain, I know the breaker is 25A, wire is 12/2 w/ground. I...
Thanks for the replys!! Understand about pulling 240 but panel is on other side of the house. 2 story house. Not real easy to get to from the shop. Wish I would have done it when I built the house...
Does anyone run their Grizzly G0513X2 on 120V power? My shop only has 120V with 25A breakers. Wondering if startup pops the breaker like the Rikon 10-325. Sort of ready to bite the bullet on the...
Darn, after researching and following threads, put my order in for a G0570 this morning. Just got a message that they are sold out. Customer service says my choices are the G0555 with riser or the...