Larry, I hate to say it but what leeson part number do you have? 5/8" shafts are 56 frame size and seldom exceed 1 1/2 hp for 4pole and occasionally 2hp for 2pole (3600 rpm) motors.
There is no...
Type: Posts; User: chris del; Keyword(s):
Larry, I hate to say it but what leeson part number do you have? 5/8" shafts are 56 frame size and seldom exceed 1 1/2 hp for 4pole and occasionally 2hp for 2pole (3600 rpm) motors.
There is no...
Larry, I hate to say it but what leeson part number do you have? 5/8" shafts are 56 frame size and seldom exceed 1 1/2 hp for 4pole and occasionally 2hp for 2pole (3600 rpm) motors.
There is no...
I have a gorillia and air cleaner in the shop..... There is very little dust flying around, but a blast from the air hose would clean off the tube real quick. Not a bad idea every once in a while.
I am in Toronto, we have about the same climate as you.
I have a 40k btu radiant tube heater. It is a 24' long 4" tube that hangs from the ceiling and takes its combustion ait from outside and...
I have 100" high ceilings in my shop so when I purchased my 3hp oneida super gorillia a couple of years ago I was stuck with getting the 35 gallon dust drum. After using it a while I must say that a...
Thanks for all the replys Gentlemen!
I know about the crimp/coupling idea.... Was just hoping for a ingeanous way to stretch that hose!!! Kinda like a boot stretcher!!!
C
For those of you that used HVAC ducting and fittings for your DC system you may have noticed that flex hose will not easilly fit over it. In many cases I have cut a 1 1/2" slit into the flex hose to...
Looks great Al! Reminds me of one I did recently:
http://www.sawmillcreek.org/showthread.php?t=76042&highlight=stilted+cabinet
I am a firm beliver in using the best tool for each job and...
Yes I have the US made Baldor.....
With ceiling joists 16" on center (14.5" between them) I am thinking it will be a tight fit given that the terminal box and capacitor housing are at 90...
A detached shop IMO is the only way to go!!! No dust in the house and no noise!!!!! My wife works shifts so when she is sleeping, I can be in the shop! Sometimes I work in the shop untill 1 or 2 am...
I have a 3hp super gorillia and due to my 100" ceiling height I had to use the 35 gallon drum. I am consdering cutting a hole in the drywalled ceiling and boxing it in so that I can raise the motor...
I suspect he is not answering your e-mails because the machine is sold. At the price it would not last an hour in the classifides where I live.
A good friend of mine says when looking for good...
A new one is $5000 and up here in the great white north I have seen 130's that look like they have been hit by and truck and survived a fire go for $1000+. A good condition used is $2500+.
In...
I had the pleasure of seing a 4 posted machine with offshore helical head at the wood show and it was so quiet compared to any other planer I have used. I expect the authentic Byrd head to be just...
So I broke down and ordered the 20" powermatic 209hh. The after tax cost difference was $975 Cdn. I really didnt want the 20" but I sold my old planer and the 2 month delivery on the 15" was just...
Thanks for all the advise. I tend to think of a planer the same way Don Abele does and think a 20" would be a huge waste for me. I have been woodworking for about 12 years now and one would think...
After extensive reasearch I decided the powermatic 15hh was the next planer for me. After selling my old machine I ordered the 15hh this week only to find out they are backordered untill mid june. ...
The tax I would have to pay would be 13% on the total amount. A small price to pay considering a similar machine is $1000 more to buy in Canada.
I am thinking about purchasing a machine from Grizzly. They do not ship into Canada so my choices are: 6 hour drive (one way) to Muncy PA and pick up the machine. Or have it shipped to the...
Yes, but they do ship to the border (less than 2 hours for me) or Muncy is 6 hours (one way).
Is the head you have the same as in this pic? If so it looks like the cutting edge of each insert is skewed like the Byrd and not parallel like some helical heads.
I am not the type to ask others to do my reasearch nor do I want to waste anyones time so I searched the archives for all threads about the grizzly G1021X2 planer. There was a lot of usefull...
We still use imperial bolts here in Canada and so does General!!! Metric fasteners are not nearly as common as you may think up here.
I didnt wood work for 2 years because I was building and setting up my shop!
The door panels and drawer fronts are spated maple. They actually have some curley in them too, but hard to see in the pics.
Thanks to everyone for the nice comments!!!!!