Stew,
I have the Grizzly 12" J/P and have found it to be well worth the money i paid for it. Certainly not up to the same performance as the European models but i have run thousands of board feet...
Type: Posts; User: Mark Henshaw; Keyword(s):
Stew,
I have the Grizzly 12" J/P and have found it to be well worth the money i paid for it. Certainly not up to the same performance as the European models but i have run thousands of board feet...
Paul,
I have built several of these in the past 15 years with the best success coming from using pivot hinges. I put one in my daughters room approximately 10 years ago and it has not sagged or...
i took a quick video but the system will not post it. I limited to under 30 seconds but no luck. The door still opens smoothly only needing a finger or two to open it. As others have said, the real...
Mark,
I have built several of these using 3/4" veneered plywood with 2 1/2" face frames. I used fixed shelves that are glued and screwed into the sides and the 3/4" plywood back. I used home made...
I have the Microsoft surface tablet. It is of course windows based and I have downloaded the entire DVD onto it. Running the software from this tablet is no different then from the DVD. The search...
I have had the DVD for a year now and use it quit regularly. I do a significant amount of travel to both Europe and Asia and find that I can pass a couple of hours on each flight by having the...
This is a very interesting topic! I run the quality division for a multi national corporation that has 26 manufacturing plants throughout the world. We built and currently operate a 1 million...
Jeff,
Please let me know what kind of face shield you typically wear and if you believe it would have significantly reduced the impact if you were wearing it. It looks like the impact was quite...
Lee,
I routinely by from both Simpsons and Liberty Hardwoods as I live in St Joe but work in North Kansas City. Simpsons is an actual sawmill so they do not have all of the support staff that you...
I really like the color contrast. Is your grain on the maple section running along the length? If so, did you take any extra precautions when gluing the small walnut lip onto the end grain? I have...
I actually purchased this Grizzly lathe from Marty who has posted earlier. It did indeed have a noise in the headstock that I thought was a bearing noise. Upon getting the lathe home I found the...
30 plus years of experience with woodworking but most of my wood turning experience has been with spindle turning. Have a quick question on hollow form turning I hope that someone can help me with. ...
I have had this same issue happen to my G0514x2 saw, only I did not over tighten. I was resawing 10 in walnut using a 1" blade and noticed quit a bit if vibration after 45 minutes of cutting. I am...
Have a Grizzly 00733 lathe with a 2 hp variable speed drive. The input to the drive is 220v single phase but the output to the motor is 3 phase. The lathe is out of its warrantee period and is...
Rudy,
Just to quick note to let you know that I have owned a Grizzley 12" planer/jointer combo machine for 3 years. I am very happy with my purchase. I am a serious hobbyist making period...
Ken
Yes, I did dovetail the legs to the pedestal, I built a small jig to hold the pedestal horizontal and locked in place. Routered 3 flats onto the pedestal 120 deg apart from each other. Then I...
In late November I was in need of a 16/4 Walnut turning square to make a pedestal for a tilting tea table. Having called all of the local wood mills in Missouri as well as several of the larger wood...
I have had the Grizzly J/P for 2 years now and I quite happy with the purchase. Switch from Jointer to planer at least twice a week and have never had any issues with the beds going back to their...
Thanks Brian and Eric,
Yes, I did try both Goby and Hearnes with no luck. Both carry 16/4 but will not cut into a large slab. I have no problem paying $20/lb ft for the piece but can not put $700...
I have a requirement to build a pie crust tea table out of walnut. I have some book matched crotch walnut for the table top but am not having any luck finding any 16/4 in which to turn the center...
I too have the Bosch and could not be happier. This is the forth miter saw I have owned and it is certainly the most accurate. Long angled cuts (>10") that I used to perform on a table saw miter...
I have the Grizzley J/P for 18 months now. The unit works very well. I am particularly fond of the helix carbide head. Cuts very cleanly (even figured wood)with much less noise then the lunchbox...
I have owned the Grizzley jointer/planer with the spiral head for 18 months and am quite pleased with it. The sound level during full width planning is much lower then my previous 12" lunch box...
I have owned the Grizzly 12" J/P for a year and have been happy with the machine. I will echo previous posters who have stated that if you have the money and space, seperate machines will be a...
As an owner of a 12" Grizzly J/P with a carbide helical cutter, I would certainly recommend it for the serious hobbyest. It replaced an 8" HSS knife jointer and a Dewalt 12" lunchbox planer. For...