Wrong, Wrong, Wrong:rolleyes:
You have mistaken the highly spalted nature of the wood shown in the cabinet as words/drawings. And it is certainly not disposable - still waiting for the auction...
Type: Posts; User: Robert Ducharme; Keyword(s):
Wrong, Wrong, Wrong:rolleyes:
You have mistaken the highly spalted nature of the wood shown in the cabinet as words/drawings. And it is certainly not disposable - still waiting for the auction...
I finally decided to get a new custom router table while I worked on my other workshop cabinets. This has highly precise custom fitted joints and uses minimal duct tape! :D
It has turned out to be...
I am trying to determine what size drawer I should put in a cabinet with the following inside measurements:
Depth - 27.75"
Height - 4.75"
Width - 22.75"
I have read many books on...
I used a 48" starrett straight edge I during the construction. I also spent a LOT of time in building a flat surface to do the construction on. Since I did not have a reference surface, I took some...
Yes Mark, I did the torsion top. Unfortunately, I did it each single piece instead of doing slotted pieces of wood. Learned something from that. The top is 52" x 62".
I am planning on rounding off...
For those who are interested, Amazon.com has a sale on Delta Hollow Chisel Mortisers 14-651 for only $225. In addition, if you have one of the Delta X coupons, you get an additional $50 off. ...
Finally had a chance to get back in the shop and do some work. I needed a bench that was reasonably large that would stay level. Created an assembly bench using a torsion top with a 1" maghonay...
Yep, missed that part. Never mind. :o
Hey, critical question here. HOW ACCESSIBLE are the GFCIs? Are they going to be placed in the enclosure for the tub? If so, you will have a hard time resetting them. You could do like I did and that...
If the PVC will be above ground, you probably need to make certain it is Schedule 80 (electrical, not plumbing).
Note that for PVC, every 100' will expand 1" for a 25 degree temperature change...
Definitely use the heavier copper (L). I would only use the flexible underground because it is hard to make it look straight hanging on the wall. Whether or not you should use 1/2" or 3/4" pipe? I...
You might also want to be guided by the height of your walls. If they are standard height, you can use shorter baseboard trim. However, if the rooms are 9' or higher, probably want a baseboard trim...
Very similar to what Alan said,
Cut out templates of the inside of the window so you have a form with a back that is the radius of the window and a other side that is the radius of the window...
If you go to the starrett web site, you can find a local distributor. Call them and ask for the new catalog - 125 years Starrett (758 pages :eek: ). You can see all the versions of the tools and...
You do not mention anything about what sort of shelves and how high off the floor it is. This could have impact on seeing and accessing tools.
Have you seen woodworking at home DVD on their wall...
Nice looking, I think that I will have to buy some to play with also. One question however, why do you need to have an Uninterruptable Power Supply (UPS) arrive? I don't see any power cords? :D
Welcome to the area.
Sorry I don't know where you can get hand tools other than through the internet, and woodwoorking shows. There is a small store in Loveland. Might also try Sears Trostel at...
Welcome. Hope you enjoy your stay as much as I have.
For us turning impaired, how about a picture - what is a glue block :confused:
Very nice looking shop. Waiting to see what comes out of it. :)
I have built my house using steel framing and stucco exterior. Cannot even tell steel was used. For my workshop, I used a steel building package but did not take the steel for the walls. Instead I...
The powered jointer would be easier to get the straight edge than the hand tools. I also think a jointer is a critical piece of shop equipment.
By the way, welcome to the creek (if possible you...
Hey, cute candle!
In regards to the bread crumbs, they are very special, green bread.
Good ideas on the designs. Enjoyed this thread.
All that is missing is the post/hole to insert the beer holder for when you are sitting in bed looking at the football game :)
Excellent! Man I wish I could do work that good. Maybe someday (100 years from now if I try hard) :(