This looks like it is in Canadian Dollars.
What Extras come with it.
Rotary attachment is $1,800 - $2,000 or more new.
Photograv $500.00
CorelDrawX4 $350.00 - $400.00
My 2009 Epilog Mini 24...
Type: Posts; User: laura passek; Keyword(s):
This looks like it is in Canadian Dollars.
What Extras come with it.
Rotary attachment is $1,800 - $2,000 or more new.
Photograv $500.00
CorelDrawX4 $350.00 - $400.00
My 2009 Epilog Mini 24...
Bruce
try reversing your settings, I run painted Brass on a 50 watt at 100 speed and 30 - 35 power. the residue maybe because you are getting to much heat.
Hi Bruce
I just use a soft rag with soapy water ( wrung out) or for plastic I use a magic eraser made by Mr Clean
Good luck
If it needs to be protected from vandalism and weather you could always put a piece of plexiglass over top of it, just make sure the sign material is UV resistant.
Post pic of finished sign if you...
you could use the auto focus, not ideal for all applications but will do for most.
Hi Matt
I use coreltips.com and some of the other corel sites, youtube has some video tutorials aswell, just do a search for laser engraving.
Google has a lot of info if you haven't tried it yet....
You could try JDS dot com,
they are in the US and have a large selection of componants.
Beuatiful work, and now you have your foot in their door.
Adam
Are you using your laser table size for your page size.
I had this same problem and I contacted Epilog thinking it was an alignment issue, they had me run a test and it came back negative, the...
Thanks Ron, we have been trying this number for over a week now and it just says they (Tromar) are closed.:confused:
Does anyone know what happened to Tromar, They have shut down their two locations.
This is going to make it hard to get supplies.
I subscribe to EJ, it is a great mag.
And I agree that we can learn most if not all we need to know from the Creek and it's members.
Thanks
John
I have this machine, it is at least 20 yrs old or more and runs on DOS.
It works great . if you could post a picture of the bed and the coputer componants I can see if it is the same and then...
Steve Good just did a video on his website (http://www.scrollsawworkshop.blogspot.com/) he used inlace on a couple of projects.
scroll to bottom of page.
Hi Miguel
This is my first attemp at uploading files, hope they work.
These are all I have, good luck.
John
I'm going to take a shot in the dark here, could it be possible to turn off the rotary in the print driver or operating program.
Was it working one minute and not the next, if so did you do...
I missed Holiday wishes to all on the creek, (layed up with a herniated disc)
so now Wishing the best for everyone in 2010.
John
In the past I have needed the help of epilog service techs and I too sent emails, and within hours of sending them I either had a response back by email or I recieved a phone call back. (Koy)very...
Nice job.
That must have been quite a work out for your laser, removing all the black. Have you tried AlumaMark yet, it comes in several colors and would be less work for the laser which means less...
Kerf is the thickness of the cut line.
Good god man ,you must have a lot of patience to do all that work and layout. Fantastic job.
Looks to be the Black Anodized Aluminum.
There is also the AlumaMark, comes in gold or silver and engraves black.
Link below.
http://www.horizonsisg.com/
I've had the same thing happen, usually painted alluminum. seldom on brass.
Laserist ?. Laser Tech ?
WOW, very nice job.