I use small blocks of scrap wood glued on with CA glue spaced 90 deg. apart.
Type: Posts; User: Randy Degen; Keyword(s):
I use small blocks of scrap wood glued on with CA glue spaced 90 deg. apart.
Mike You will love this machine I have had mine for about a year it is a fantastic lathe. Randy :)
http://www.monster-wood-tool.com/
Your best bet is to get a live center for the tailstock . Randy
one last question. this is the first time i have ever used a dead center. before i broke the banjo peice, i was turning a...
Dave go to this link this is what you are looking for. Randy
http://www.grainger.com/Grainger/items/1EJW6
I have a craftsman grinder and also bought some new norton sg wheels mine wobble too these wheels are made south of the bourder MEXICO. Part of the problem was the washers on the grinder as it would...
You can get General Finishes ''arm-r-seal'' form Woodcraft . Randy
I have also been having trouble I'm using roadrunner its been running slow for about 3 weeks . Randy
I would like to use some corian and wood in a segmented bowl ,what would be the best glue to use with this combo Thanks Randy
Jeff
I had the same problem with my pump the rotor was rubbing inside the housing it runs in they are fit at very close tolerance. The housing had galled marks inside . I called surplus center...
I just finished this today it is 4" in dia 4" tall ,Ebony,Holly,Wenge,Red and white veneer. Lacquer finish Beall buff wax only.Randy
Brian Yes it is black dyed veneer. Thanks Randy
Quinn It is 5 1/2" tall and 7 1/2" dia . Randy
Johnathan Yes there is double the amount of segments in the two center rings. Randy
This is my second segmented bowl since getting my oneway 1640 back in october . It is made of Holly,Bloodwood,and Purpleheart Thanks For looking . Randy
I bought a piece of Ebony that is coated in wax what kind of moisture is save to work with.The piece I need to use will be 3" in dia. and 3/8 thick I have a Delmhorst moisture meter but it does not...
Count me in Thanks
Randy
Take a look at www.onlinemetals.com they have A-2 Toolsteel in 18in lengths you would still have to get it heat treated after it has been machined. Randy
Boeshield Blade and bit resin,gum & pitch remover works Great!! and it is Non-toxic Biodegradable and non-flammable Randy