Search:

(Second reply..don't know where the first one went)

Mike - Whoa..that worked...sort of.:eek:

First I placed 2 +/- 12x12 pieces of chipboard (cardboard) @ .044" over the table. Raised the...

Lee - Yes, those are the ones. And yes, they are at the top just below the slot When we set the system up at the store we had 2 additional spacers taped at the very bottom on either side of the...

Dan - 1) Covering the unused areas is something I normally do. Worked at the store, doesn't work at home. 2) AS Lee noted, no cover plate on VL. 3) I wish someone were close by!

Lee - 1) The...

OK -

1) Shortened hose to DC to 4-6 ft. 2) Removed exhaust hose from DC 3) Installed honeycomb table, added sheet of copy paper, allowed laser to adjust table to appropriate...

OK - Reconfiguring set-up (after I finish a couple of items for a Boy Scout troop's 75th anniversary). Will post pix when done.:rolleyes:

Rob - 1)Removed hose, impeller spins clockwise. I don't know if that's the right way or not. 2) 3" port on laser to 4" hose to 4" port on blower. 3) Blower plugs in to wall. Seems to run OK.

Joe -...

Rob & Mike - We used the Grainger unit at the store, fantastic downdraft. Moved it to the house...no downdraft. Replaced it with the Penn State to reduce the number of reducers required and because...

Joe,

When we first set it up in the house, we used the exact same hose (actually rigid tubing) that was in the store...all 40 feet of it, straight out the back of the laser (well, except for 2...

Hi Guys -

Dan -

Good airflow - yes (best way to blow the cat hair out from behind the sofa :))
Good Suction - yes (to the point of almost sucking the plenum plate against the back of the...

Hi All,

First, let me say that SMC is now my new best friend. I have been lingering in the background for a couple of months and have gleaned so much info. Thanks to all of you!

We bought a...

Here's an image on one of their deep purples. Sorry about the lighting. The cardstock has a slightly glossy finish which caused the darkness to one side. Besides, I don't take the best pictures!

Will this work?

CLEVELAND font appears to be a good match.