Search:

count me in

Add me, Thanks

I use the solution almost daily. I dilute with DNA and apply with a foam brush. There is very little waste and I have doing it this way for years. Just remember thin is good thick is bad. You...

Opt / count me in.

Thanks,
-pete

Hi John, you might want to try this product, it's called Maskoff. I have used in the past with good success. I got mine at a local plastics distributor in the area. With a quick google search I...

Count me in, Thanks.

I've purchased from here usplastics.com, here's the link to the fluorescent acrylic

http://www.usplastic.com/catalog/item.aspx?itemid=24077

-pete

Here you go.

-pete

Ok, how about $170 plus shipping, check here http://www.oemoptics.com/index.php?cPath=2&osCsid=5cc470a68df75a147094cb390da155db I have used them is the past with no issues.

-pete

I have switched from newspaper to tissue paper, much thiner and also conforms better to the surface. Just hold in place and spray a water & soap solution with a small spray bottle.

-pete

Please count me in.
-pete

Add my name to the list.

-pete

Add me in

-pete

Yes, see http://www.oberonplace.com/products/jigsaw

-pete

I purchased a 2" lens from www.oemoptics.com after I put a crack in my lens. There is a 2" lens there for $180.

-pete

I run both Corel 12 & 13 on MacBook Pro 17" using Parallels. When done I just shoot the file over the network to the PC running the laser.

-pete

One other simple thing you could have done was to select "close curve" which is found in the Object Properties normally the last tab looks like a tilde symbol. There you will find an option to close...

Darren, that capacitor you installed I believe is not a silver mica as called out the schematic. Dan is correct, based on the capacitor type and the operating frequency you can generate self heating...

Thanks for reading but I just figured it out.

-pete

Hi to all,

Wondering if anyone knows how to fire the laser in alignment mode on ULS X-660 system. Just purchased the HPDFO lens kit and going throught the alignment. The manual says 'Alignment...

Try this stuff "Maskoff" it's used to remove stuck on paper mask. Works for me.

http://us.st12.yimg.com/us.st.yimg.com/I/yhst-92284169562666_2001_1930031

-pete

Please add me in

Thanks,
-pete

Hello all,

Is it possible to engrave on a clear polystyrene??? I've been asked to quote engraving a 6"x12" area on clear polystyrene. After doing a little research I have read that CD jewel...

Hello all, received a job to do some glass boxes, after I received them I saw that they were Lead Crystal 24%. After reading posts in the past about lasering leaded glass I became a little...

Mark, the grind stone is used manually.