Search:

Any chance you have pictures or plans for the step stool? My granddaughter is 2 in January, and I'd love to give her one.

Gordy

Count me in please. Thanks.

Please count me in. Thanks.

Anyone have any good tips for cutting the tops of deck posts so they end up level and flat? I've tried a circular saw, jig saw and sawzall, and can't deem to make an acceptable cut.

TIA
Gordy

I've got the I/R and I like it a lot. We have an industrial sized I/R at work, powering a good sized factory, so I figure they must know what they're doing. I'm not sure how to compare it to the...

Read through old posts. We're easily entertained, and there has to be pics. I've read it a thousand times..
\"

I bought a 6X12 trailer, which works great on sunny days in the summer. Now I'm looking for a 5X10 enclosed trailer so I can work other times of the year.

I bought mine at a Rockler partner store. Here's a link to the directions they gave me. http://www.rockler.com/product.cfm?Offerings_ID=786&TabSelect=Details Click on the technical document.
Gordy

I'm using the little figure 8 table top mounting brackets for the first time. It's a small 18X18 nightstand made out of poplar. I can see where if I put the 8's on the end grain sides of the table...

I just bought a 2.25 and it seems like a considerable step up from my Sears.

That's good news. I just bought a 2.25 router 3 weeks ago, and I love it. I see on your web site you have a 12" sliding CMS. Is that available in the US? Is there anywhere to see one in person? It...

Or go here... http://www.awbookstore.com/prodinfo.asp?number=AW0704

It's $10 with USPS shipping.

Great idea. The 2 center uprights will be 1.5" so that could work there. The 2 outside of that, on each side, are only 3/4 plywood so I don't think I'll have a 1.5 face frame. Prolly more like an...

I'm not communicating well. Picture a wood counter top... Sitting on top of that wood counter top are the uprights that support the adjustable shelves. At the very top of the uprights, they are...

The base cabinets have a 3/4 top. I might use the figure 8's to attach the top to the cabinet, but the upper unit will sit on top of that, so they won't work here. GA

I'm in the process of building an entertainment center similar to the picture below. I've built the lower cabinets and I'm ready to start on the upper shelves. The base cabinets are 17" deep and the...

Which one is it? I need to upgrade. I'll be doing a few raised panel doors, not a lot, but some. I'd like as much above the table adjustments as possible, and easy bit changes. Freud has a nice kit...

I'm building an entertainment center similar to the one pictured below. The bottom cabinets are built with face frames, and I'm planning shaker style doors with overlay. In the center, I'd like to...

I don't have that particular one, but I did just buy a kit from them that had the magnetic base, arm and dial indicator. The arm was a little awkward, but I would guess they all would be. I made it...

I started a new project by building my first cabinet face frame. Brought the trailer to work today so I can pick up the rest of the lumber I need during lunch, then back in the shop tonight to make...

They had the set with a case for 5 bucks more. Just ordered.
Thanks.
GA

Does anyone have any knowledge of this gauge from Hartville Tool?

http://www.hartvilletool.com/product/11482

$99 with a digital gauge seems like a good price if it works well.

TIA Gordy

Not sure where I mis-spoke, but I don't have a sled, I'm getting ready to make one.

The kickback was my own fault. I was standing to the right. I cut a board, turned off the switch, then reached...

What's the right way to use a sled? I'm gonna build my first one but I'd like to know how to use it first. What keeps it and the piece you're cutting from kicking back? Do you cut, then stop and turn...

Me Too.

Gordy