I think i would say the Stubby, but i haven't seen a Robust up close and personal.
Type: Posts; User: Kevin Kelly; Keyword(s):
I think i would say the Stubby, but i haven't seen a Robust up close and personal.
I emailed Oneway a couple of weeks ago about replacing a platform on my Oneway jig - not the whole assembly, just the platform. I think within a day or two i had an email from Peter, with his phone...
That link is something else. Go to the Misc tab and check out the hunk of wood that Nick Cook tackles.
Great present, congratulations! Pardon my ignorance, but can you tell me more about the fence extension. I assume it's cast iron and the hole is for a router? What size is the fence?
Loaned my 1014 to a friend a while ago and only just got it back. Now it doesn't turn on. Yeah, I learned my lesson. Does it have a fuse that might have blown? If so, where?
May need a new belt,...
They have this one. I'm pretty sure it's a synthetic one. There are real ones, but i'm not sure how much you'd notice a difference. I think Highland Hardware carries the natural stones.
I also do not soak my 8k stone but spray it with water. You can get something called a nagura stone, which is very small, that you rub the surface of the 8k stone with before sharpening. Creates a...
I can't get in to see the pics. Says they either don't exist or i don't have permission.
I want to build a cabinet for a router table, which will serve as the fence table on my table saw. The router's a pc7518, if that matters. I'll put in a dc port, but do i need to provide any...
Pretty sure it's 1/2 hp.
I just got my Jet mini back from the friend who borrowed it a couple of years ago. Guess what? Won't turn on. He says it was fine the last time he used it. Whatever; lesson learned. An electric motor...
Beautiful. If i ever have the chance to build a proper bench, i'm gonna use walnut, too. I just love it.
When i added 220, my electrician friend recommended Pass & Seymour L620-P. Mine are 20 amps.
Hey Chris,
Thanks for the great deal on the Jet; it's absolutely perfect for our needs. You are going to have a great time with Bill; it is time and money well spent. When i went last year, i...
I need to replace the belt on my Conover and cannot get the spindle apart. The directions are only marginally helpful, at least for me. They say to unlock the pre-load washer, but i don't know what...
I have Woodcraft's slow-speed grinder, and the bearings are on their way out. It's a year and a half old. Can someone recommend a good solid 8" grinder that will last a while? I'm not sure i can...
Having take some lessons from Bill, i'd love to have a video to refer back to. It's especially helpful for those of us who don't get to the lathe near as often as we'd like
I have the 8" slow speed grinder that Woodcraft carries; it came with 60 and 100 grit white wheels. It seems to me that they cut slowly and fill up with metal from the tool really quickly, and i'm...
Thanks for the info!
Is shellac measured by weight or by volume? So that if a 1 lb cut is 1 ounce flakes mixed with 8 oz of alchohol, is that 1 ounce by volume or weight?
Thanks,
kevin
Thanks, John. I had forgotten that the bies was the snap-in variety.
John,
I have the uniguard and splitter as well. What made you change the splitter to the bies?
After being absent from the shop and ww internet boards for more time than i want to mention, i had a great weekend. I built (finally) a decent outfeed table for the ts, turned my 30" bies fence into...
I can't tell you how much your story and pics did for me today.
For my birthday this year one of my relatives gave me what i'm positive is a Pfeil carving tool, marked with 3/35. I don't know what to do with it; i don't carve anything. Is it useful in other ways?...