Search:

It was the start capacitor, thanks for the help.

Saw turns freely, motor came to a stop cause I fed the board too fast. I'll get a new capacitor and see if that works and if not, I'll just replace the motor.

The motor spins freely by hand.

I was resawing a bit of oak when it slowed to a stop. I shut it off, backed the blade out, and when I restarted I got the humming. I gave the belt a quick jog and...

I don't know much about electric motors so I was hoping someone could offer some advice. I've done some research and I think it may be dead. The motor just hums when I turn it on. I took the belt...

I just repaired my neighbors 8300 yesterday, their screen would go black. Nothing else. When I went over there, it happened to blue screen with an nv4_disp error, nvidia display driver. I think it...

That's good, I don't feel stupid now. I didn't think there was anything that could level it but it's always possible to miss something. I also couldn't see where it would be an issue since the wood...

I didn't get a chance to fidgit with it, but I saw the adjustment to square it to 90. Did I miss one on leveling it also? I guess that wouldn't surprise me since it was late

I recently bought this machine and had a little bit of time to get it out of the box last night. Haven't had a chance to use it but I did have a question to those who own one - is your folding table...

You should've joked with her that you yourself ordered it a day before and were surprised they could get it to you so fast:D

Another tracfone user here, as well as my wife. Search for tracfone promo codes and you get free minutes with each purchase. Get 90 days service (minimum) with each card and they accumulate.

110,220, and the no name (I think Sargent after a little research, no sure what model):
http://www.hunt101.com/data/500/medium/P1060135_Small.JPG...

#4 appears to me to be in decent shape:
http://www.hunt101.com/data/500/medium/P1060131_Small.JPG
http://www.hunt101.com/data/500/medium/P1060132_Small.JPG...

#5:
http://www.hunt101.com/data/500/medium/P1060127_Small.JPG
http://www.hunt101.com/data/500/medium/P1060130_Small.JPG
http://www.hunt101.com/data/500/medium/P1060129_Small.JPG...

Here's some pics, the #5 is pretty beat up and I think there's a piece missing from the 220. The one with no name has Union Mfg Co which a search revealed is Sargent I guess. The rasp was just junk...

The Sargent is at the top of that pic, looks just like a piece of wood with a slit in it. The front is stamped with Sargent #3815.

Looks something like this but not nearly as nice:...

I gave him $40. Felt a little bad about it, but not because I know anything about planes. He was divorced in a run down old duplex and he seemed eager to take the $40. Probably could've went $30. ...

Just got the models from him:

Sargent #3418
Stanleys:#5, #4, #110, #220, and no number on the other one.

I appreciate the responses. I'm going to take a look at noon. He's got a rigid oscillating sander for $75 too that I'm interested in. Maybe I can get it all for $100.

Just got his reply back,

The planes are Sargent (The big wood one) and Stanley. They are all old, and in Fair condition.

Worth my time?

Someone on my local craigslist just posted a bunch of planes and chisels for $50. I'm just getting started in woodworking and know nothing about planes. Not much detail in the posting, waiting for...

Thanks for the opinions. I ended up getting the Jet. What a difference from the benchtop! Setup was straight forward, though leveling the extension wings wasn't the easier. Made some cuts, very...

Pretty much decided on the Jet. Plus it's in stock so I can get it tomorrow. Thanks for the replies.

I'm in the market for a new tablesaw, currently looking at the Jet JPS30 and the Craftsman 22114. Both will be around $630. Am upgrading from a benchtop Jet. Both sales are done after Sunday. I...

1 year old, available on CL. I didn't find many reviews of this jointer on google. Anyone know much about it? Guy says it retailed for $900 new, will take $450 for it.

Wasn't really looking to upgrade my small Jet benchtop, but this looks hard to pass up? It's a 2hr drive for me. Grizzly Model Is TCS-10L (I believe that should be TSC), 1.5 hp motor. Is this a good...