Search:

I am building a shop stool and the seat dimension is 13" diameter and 1 1/2" thick. I am a novice wood turner and planned to true up the blank and round over 1 edge. Seemed simple and I could use...

I went from separates to a Minimax CU300. Life is more complicated, but the space savings is huge. And plan on spending $$$ for shaper bits. You will be disappointed in using router bits on your...

All comments made by everybody are what made me nervous. Looking for an 8" dado deal.

Thanks to all

Clarke

5/8 inch arbor, but dado is 1", so I had to buy a bunch of washers to make it work. It works, but 8" dado with 5/8 bore would be best.

Cut away a small part of the what I would call the saw blade shroud. This allows me to raise the 10" dado blade higher. And the dado table saw insert is too small. I will switch to 8" when I find...

Acquired a used Minimax CU300. With a few modifications I have a 10" dado set working on it. I know 8" is the recommended size, but are there any repercussions from the large size of the 10", that...

I have used this set up and it works!

This will do it. Sleeve connects to port in machine. Female piece of QD fits in sleeve. Male QD on your hose. However, it can get expensive if you have multiple machines, where you need a sleeve...

Almost finished installing the ductwork for cyclone in garage. I have a drop in the middle of the shop to my Minmax cu300 combo machine. It will have 2 flex hoses to connect to the planer, jointer,...

For my Delta 50-761, I added a Wynn canister filter on top and put the cloth filter on the bottom. I could never easily attach the poly bags on the bottom. The Wynn canister came with a few poly...

Building a garden arbor out of Western Red Cedar. Staining it with "Cabots wood toned deck and siding stain". I was thinking it might be a good idea to apply some wood perservative to the sections...

I might have to do the stand. Not as elegant as the wall mount, but if hidden inside the closet, who cares what it looks like. Eliminates the unwanted transfer of noise to the one wall I was...

This is different. I was thinking of the connection to the wall. These would go on top of the wall mount bracket and underneath the cyclone. I did not think of that.

I have a used cyclone I plan to mount on a wall (no stand) in the corner of my large garage. To lower the noise level I plan to enclose it with 2 walls, including a solid core door. The 2 walls...

You are referring to the "Tail-Vise Screw" that Lee Valley sells for $37.50?

Shop not kitchen. I spoke with Sherman Williams Finishes dealer who services the whole state and decided to go with the SW waterborne acrylic (Kem Aqua Plus white) tinted to my color. The local SW...

Scott,

I was referring to paint not stain/dye. I see the other thread on colored cabinets and will try the local Sherman Williams. Nobody else local. I will have to see how I can modify my...

New to spraying, but willing to learn. I have a large compressor (3HP 60 gallon) and a new HVLP gun (Devilbiss Finishline FLG4) with multiple spray tips (1.3, 1.5 and 1.8). I am building some shop...