Search:

anyone know how to solve this?

HI Rich, that brilliant much better now, only thing i am struggling with now is clean edges as it is almost pix elated, my Epilog used to finish to a perfect sharp letter this seems to have very fine...

all i do is change to scan and change power and speed, typically 10-15 power and 350-500 speed as its mainly cast perspex that i am engraving.

should i be playing with other settings?

it seems to be splitting the beam and causing double engraving, strange i when it cuts its fine? please see image.249832

i there anyway to easily produce large quanteties, i have a bender for straight bends but i really need to find something for curves?

i have reduced the power and its really cold out so running ok now, couple questions, if the is scaling in the tubes from the water is there any way to flush/clean? also struggling to engrave...

I have a twinhead SH-G1290 80W RECI LASER ENGRAVING AND CUTTING MACHINE when i cut i find the machine overheats quickly and i have to keep stopping the machine and wait to cool off.
the chiller is a...

i have also joined the Shenhui club with a double head 80W, been a real slow build up due to sensor issues.
i am struggling with engraving cleanly, and also find that the machine heats up quite...

I have 5mm acrylic to bend, which is no problem normally as i have a bending machine, but my client wants around 1000pcs with a curve, what is best way to do this that they should all be uniform? ...

stared ordering parts, $1200 and counting......

Spoke to Epilog and have dismantled top quarter, now to start cleaning up an see what's salvageable, debating if. I sent the lid for powder coat or just leave as is!
must say Epilog was extremely...

sorry John, wont sell yet, going to try and salvage 1st. thx anyway.

wow thanks all.
going to continue dismantling and post pictures as i go on.
Local distributors would rather sell you a new machine and write off this one, just my overall feeling.
I would never...

trying to get through to Epilog USA to find out how much a lid/controller would be for this machine, no reply, is all still closed in the USA for July 4th?

How would u suggest figuring out whats required and how easy is it to get the parts from epilogue US?
Europe seems kinda complicated.
What would you estimate cost?
help is much appreciated.
mike

I would say probably Fume build up......

its a long story and quite a sad one :mad: , A new laser is being ordered but i am sorely tempted to try and salvage this machine as a secondary unit, machine has had retivley light use and is aprox...

236052236053236054236057236061236062

236047236048236049236050236051236035236036236037